Part Image

DS91D176TMAX/NOPB - Texas Instruments

Description: LVDS Transceiver 0.65V 8-Pin SOIC T/R

Download DS91D176TMAX/NOPB Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
DS91D176TMAX/NOPB - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D(R-PDSO-G)
click to zoom
3D Models
DS91D176TMAX/NOPB - Texas Instruments  - 3D model - Small Outline Packages - D(R-PDSO-G)
click to zoom

DS91D176TMAX/NOPB Details

  • Manufacturer Part Number:

    DS91D176TMAX/NOPB

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Package Description:

    SOP-8

  • Pin Count:

    8

  • ECCN Code:

    5A991.B.1

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000015 A

  • Input Characteristics:

    DIFFERENTIAL

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-899; TIA-899

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    0.48 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.008 A

  • Output Polarity:

    TRUE

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    7.5 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    29.5 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    5 ns

  • Width:

    3.9 mm

DS91D176TMAX/NOPB Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. The device should be placed near the center of the board, and the input and output tracks should be kept short and away from noise sources.
  • Ensure good thermal management by providing adequate heat sinking and airflow. Use a thermal interface material between the device and the heat sink, and avoid exposing the device to temperatures above the recommended maximum operating temperature of 125°C.
  • Use a 100-ohm differential termination at the input and a 50-ohm single-ended termination at the output. The termination resistors should be placed as close to the device as possible to minimize signal reflections.
  • Use a combination of oscilloscopes, logic analyzers, and signal generators to debug the issue. Check the power supply voltage, clock signal, and data signals for any anomalies. Consult the datasheet and application notes for troubleshooting guidelines.
  • The device has built-in ESD protection diodes, but additional external protection measures such as TVS diodes or ESD arrays may be necessary depending on the application. Follow proper PCB design and handling practices to prevent latch-up.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

DS91D176TMAX/NOPB Overview

Use the download button to access the DS91D176TMAX/NOPB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DS91D, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to DS91D176TMAX/NOPB

Showing 0 results

DS91D176TMAX/NOPB Alternates

Showing results

Image Part Number Model
Part Image DS91C176TMAX/NOPB Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image DS91C176TMA National Semiconductor Corporation

Line Transceiver, 2 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image DS91C176TMAX National Semiconductor Corporation

Line Transceiver, 1 Driver, CMOS, PDSO8

Part Image DS91C176TMAX Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image DS91D176TMAX Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

For a full list of alternate parts for DS91D176TMAX/NOPB, check out Findchips.com