ROHM recommends a PCB layout with a thermal land pattern that allows for efficient heat dissipation. A minimum of 2oz copper thickness and a thermal via array under the device are recommended. Refer to ROHM's application note for detailed guidelines.
Follow ROHM's recommended soldering conditions: peak temperature of 260°C, soldering time of 10 seconds, and a soldering iron temperature of 350°C. Use a solder with a melting point above 217°C. Avoid applying excessive force or vibration during soldering.
The maximum allowed voltage for the input pins is 6V, which is the absolute maximum rating. However, for reliable operation, it's recommended to keep the input voltage within the recommended operating range of 2.7V to 5.5V.
The DTA024EMT2L is rated for operation up to 125°C. However, the device's performance and reliability may degrade at high temperatures. Consult ROHM's datasheet and application notes for guidance on using the device in high-temperature environments.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the DTA024EMT2L from electrostatic discharge. Follow proper handling and storage procedures to prevent ESD damage.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA024EMT2L Overview
Use the download button to access the DTA024EMT2L 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA02,
or try a keyword search, such as Small Signal Bipolar Transistors
