ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
The DTA044EUBTL requires a bias voltage of 2.5V to 5.5V on the VCC pin, and a logic input voltage of 0V to VCC on the input pins. Ensure the input signals are within the recommended voltage range to prevent damage or malfunction.
The maximum power dissipation for the DTA044EUBTL is 1.5W. Exceeding this limit may cause the device to overheat, leading to reduced performance or failure.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the DTA044EUBTL from electrostatic discharge. Follow proper handling and storage procedures to prevent ESD damage.
The DTA044EUBTL is rated for operation from -40°C to 125°C. Operating the device outside this range may affect its performance, reliability, or lifespan.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA044EUBTL Overview
Use the download button to access the DTA044EUBTL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA04,
or try a keyword search, such as Small Signal Bipolar Transistors
