ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure stable operation with a high-impedance load, ROHM recommends adding a pull-down resistor (e.g., 1kΩ) between the output pin and GND. This helps to reduce oscillations and improve stability.
Although the datasheet specifies a maximum input voltage of 5.5V, ROHM recommends limiting the input voltage to 5V or less to ensure reliable operation and prevent damage to the device.
ROHM recommends implementing ESD protection measures, such as adding TVS diodes or ESD protection ICs, to prevent damage from electrostatic discharge. The device itself has some ESD protection, but additional measures are recommended to ensure robustness.
Although the datasheet specifies an operating temperature range of -40°C to 125°C, ROHM recommends operating the device within a range of -20°C to 85°C for optimal performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTA113ZCAT116 Overview
Use the download button to access the DTA113ZCAT116 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA11,
or try a keyword search, such as Small Signal Bipolar Transistors
