ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended derating curves for the device. Additionally, consider using a heat sink or thermal interface material to reduce the junction temperature. ROHM also recommends using a thermistor or temperature sensor to monitor the device temperature.
Although the datasheet specifies the recommended operating voltage range, it's essential to note that the input pins have a maximum allowable voltage of 6V, which is higher than the recommended VCC voltage. However, it's still important to follow the recommended operating voltage range to ensure reliable operation.
ROHM recommends using ESD protection devices, such as TVS diodes or ESD arrays, on the input lines to protect the device from electrostatic discharge. Additionally, follow proper handling and storage procedures to prevent ESD damage.
ROHM recommends a soldering temperature of 260°C (max) and a soldering time of 10 seconds (max) for the device. A reflow soldering profile with a peak temperature of 245°C and a dwell time of 30-60 seconds is also recommended.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DTA115ECAT116 Overview
Use the download button to access the DTA115ECAT116 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DTA11,
or try a keyword search, such as Small Signal Bipolar Transistors
