ROHM recommends a PCB layout with a thermal pad connected to a large copper area on the bottom layer, and multiple vias to dissipate heat efficiently.
Use a heat sink or thermal interface material, and ensure good airflow around the device. Also, consider derating the current and voltage according to the temperature derating curve in the datasheet.
The maximum allowable voltage is 1.5 times the rated voltage (14V) for a short duration (less than 100ms). However, it's recommended to operate within the rated voltage to ensure long-term reliability.
Yes, but be aware that the device has a limited switching frequency (around 100kHz) due to its internal capacitance. You may need to add external components to ensure stable operation at higher frequencies.
Use ESD protection devices such as TVS diodes or ESD arrays on the input lines, and ensure that the PCB layout and handling procedures follow ESD-safe guidelines.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC014TMT2L Overview
Use the download button to access the DTC014TMT2L 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC01,
or try a keyword search, such as Small Signal Bipolar Transistors
