ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
ROHM recommends following the derating curves in the datasheet for operation above 85°C. Additionally, ensure good thermal design, and consider using a heat sink or thermal interface material to reduce junction temperature.
Although the datasheet specifies a maximum input voltage of 5.5V, ROHM recommends limiting the input voltage to 5V to ensure reliable operation and prevent damage to the device.
Yes, the DTC114TCAT116 is suitable for switching regulator applications. However, ensure that the device is properly bypassed and decoupled to prevent oscillations and noise issues.
ROHM recommends following proper ESD handling procedures during assembly and storage. Additionally, consider adding external ESD protection devices, such as TVS diodes, to protect the device from electrostatic discharge.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC114TCAT116 Overview
Use the download button to access the DTC114TCAT116 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC11,
or try a keyword search, such as Small Signal Bipolar Transistors
