A thermal pad on the bottom of the package should be connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended.
The device requires a stable voltage supply and a bias resistor (Rb) between the base and emitter to set the desired current gain. A decoupling capacitor (Cdec) is also recommended to filter out noise.
The maximum power dissipation (Pd) is 1.5W at an ambient temperature of 25°C. Derating is required for higher temperatures.
Yes, the DTC115TMT2L is suitable for switching applications due to its high switching speed and low saturation voltage. However, ensure that the device is properly biased and the PCB is designed to minimize parasitic inductance.
Handle the device with an anti-static wrist strap or mat, and ensure that the PCB has ESD protection circuits, such as TVS diodes or ESD protection arrays, to prevent damage from static electricity.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC115TMT2L Overview
Use the download button to access the DTC115TMT2L 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC11,
or try a keyword search, such as Small Signal Bipolar Transistors
