ROHM recommends a thermal pad on the bottom of the package, connected to a large copper area on the PCB to dissipate heat efficiently. A minimum of 2oz copper thickness is recommended, and the thermal pad should be connected to a ground plane or a dedicated heat sink.
To ensure reliable operation in high-temperature environments, it's essential to follow the recommended operating conditions, including the maximum junction temperature (Tj) of 150°C. Additionally, consider using a heat sink or thermal management system to keep the device temperature within the recommended range.
ROHM recommends using a ceramic capacitor with a value of 1-10uF and an X7R or X5R dielectric type. The capacitor should be placed as close as possible to the VIN pin to ensure stable operation and minimize noise.
To ensure proper operation, it's essential to follow a controlled power-up and power-down sequence. Power-up the device by applying a voltage to the VIN pin, followed by the EN pin. During power-down, remove the voltage from the EN pin before removing the voltage from the VIN pin.
The DTC124ECAT116 is an ESD-sensitive device. To prevent damage, handle the device by the body or pins, avoid touching the pins, and use an anti-static wrist strap or mat when handling the device. Store the device in an anti-static bag or container when not in use.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
DTC124ECAT116 Overview
Use the download button to access the DTC124ECAT116 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC12,
or try a keyword search, such as Small Signal Bipolar Transistors
