ROHM recommends a thermal pad size of at least 2.5mm x 2.5mm, with multiple vias to the ground plane to ensure efficient heat dissipation. A minimum of 3mm clearance around the device is also recommended to prevent thermal interference.
The DTC914TUBTL requires a bias voltage of 2.5V to 5.5V on the VCC pin, with a recommended operating current of 1mA to 10mA. Ensure the bias voltage is stable and noise-free to prevent oscillations or instability.
The maximum power dissipation for the DTC914TUBTL is 250mW. Exceeding this limit can cause the device to overheat, leading to reduced performance or even damage.
ROHM recommends using anti-static wrist straps, mats, and packaging materials to prevent electrostatic discharge (ESD) damage. Additionally, ensure that the device is handled and assembled in a controlled environment with minimal humidity and temperature fluctuations.
Store the DTC914TUBTL in a dry, cool place with a temperature range of -10°C to 30°C and relative humidity below 60%. Avoid exposing the device to direct sunlight, moisture, or extreme temperatures.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
DTC914TUBTL Overview
Use the download button to access the DTC914TUBTL 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like DTC91,
or try a keyword search, such as Small Signal Bipolar Transistors
