Panasonic recommends a PCB layout with a large copper area for the capacitor pads, and a short and wide connection to the capacitor to minimize ESR. A 4-layer PCB with a solid ground plane is also recommended.
The EEUFC2A220B is designed to operate up to 100 kHz, but its impedance may increase at higher frequencies due to the ESL (Equivalent Series Inductance). Panasonic recommends using impedance vs. frequency curves to determine the capacitor's behavior at specific frequencies.
Panasonic provides a derating curve in the datasheet, which shows the reduction in capacitance and voltage rating at high temperatures. For example, at 125°C, the capacitance is reduced to 80% of its nominal value, and the voltage rating is reduced to 80% of its nominal value.
Yes, the EEUFC2A220B is designed to withstand vibrations up to 10 Hz to 2000 Hz, 10 G acceleration. However, Panasonic recommends verifying the capacitor's performance under specific vibration conditions using environmental testing.
Panasonic recommends a soldering profile with a peak temperature of 260°C, a dwell time of 10-30 seconds, and a cooling rate of 4°C/second. The soldering process should be done in a nitrogen atmosphere to prevent oxidation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EEUFC2A220B Overview
Use the download button to access the EEUFC2A220B schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EEUFC,
or try a keyword search, such as Ceramic Capacitors
