Description:The EL5175 and EL5375 are single and triple high bandwidth amplifiers designed to extract the difference signal from noisy environments. They are primarily targeted for applications such as receiving signals from twisted-pair lines or any application where common mode noise injection is likely to occur. The EL5175 and EL5375 are stable for a gain of one and requires two external resistors to set the voltage gain for each channel. The output common mode level is set by the reference pin (VREF), which has a -
A good PCB layout for the EL5175ISZ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the input and output capacitors close to the IC. Additionally, it's recommended to use a low-ESR capacitor for the output filter and to keep the PCB traces as short as possible.
To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Additionally, ensure that the output capacitor is properly sized and that the feedback resistors are correctly chosen. It's also important to check that the input voltage is within the recommended range and that the device is not overheating.
The EL5175ISZ can handle input voltages up to 15V, but it's recommended to keep the input voltage below 12V for optimal performance and to prevent overheating.
The output voltage of the EL5175ISZ can be calculated using the formula: Vout = (R1/R2) * (Vin - Vref), where R1 and R2 are the feedback resistors, Vin is the input voltage, and Vref is the reference voltage (typically 1.25V).
The EL5175ISZ can provide a maximum output current of 1.5A, but this may vary depending on the input voltage and output voltage. It's recommended to check the datasheet for specific current ratings and to ensure that the device is not overheating.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
EL5175ISZ Overview
Use the download button to access the EL5175ISZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like EL517,
or try a keyword search, such as Line Driver or Receivers
