A good PCB layout for the FCX491ATA involves keeping the input and output traces separate, using a solid ground plane, and minimizing the length of the input and output traces. Additionally, it's recommended to use a 10uF capacitor between the VIN and GND pins to filter out noise.
To ensure stability, make sure to follow the recommended component values and PCB layout guidelines. Additionally, add a 10nF capacitor between the COMP and GND pins to improve stability. Also, ensure that the input voltage is within the recommended range and the output is properly decoupled.
The FCX491ATA can handle input voltages up to 28V, but it's recommended to keep the input voltage below 24V for optimal performance and to prevent overheating.
The FCX491ATA is rated for operation up to 125°C, but it's recommended to derate the output current and input voltage at higher temperatures to prevent overheating and ensure reliability.
The output voltage of the FCX491ATA can be calculated using the formula: VOUT = (R1/R2) * (VIN - VREF), where R1 and R2 are the resistors connected to the FB pin, VIN is the input voltage, and VREF is the internal reference voltage (1.25V).
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FCX491ATA Overview
Use the download button to access the FCX491ATA schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FCX49,
or try a keyword search, such as Small Signal Bipolar Transistors
