SERIES CONNECTED, CENTER TAP, 2 ELEMENTS WITH BUILT-IN DIODE
Gate-Emitter Voltage-Max:
20 V
JESD-30 Code:
R-XUFM-X7
Moisture Sensitivity Level:
1
Number of Elements:
2
Number of Terminals:
7
Operating Temperature-Max:
150 °C
Package Body Material:
UNSPECIFIED
Package Shape:
RECTANGULAR
Package Style:
FLANGE MOUNT
Peak Reflow Temperature (Cel):
260
Polarity/Channel Type:
N-CHANNEL
Power Dissipation-Max (Abs):
1950 W
Qualification Status:
Not Qualified
Surface Mount:
NO
Terminal Form:
UNSPECIFIED
Terminal Position:
UPPER
Transistor Element Material:
SILICON
Turn-off Time-Nom (toff):
590 ns
Turn-on Time-Nom (ton):
180 ns
VCEsat-Max:
3.75 V
FF300R12KS4 Frequently Asked Questions (FAQs)
The maximum operating temperature of the FF300R12KS4 is 150°C, as specified in the datasheet. However, it's recommended to operate the module at a temperature below 125°C for optimal performance and reliability.
To ensure proper thermal management, it's essential to provide a good thermal interface between the module and the heat sink. Apply a thin layer of thermal interface material (TIM) to the base plate of the module, and ensure the heat sink is properly mounted and secured. Additionally, ensure good airflow around the heat sink to dissipate heat efficiently.
The recommended gate resistor value for the FF300R12KS4 is between 10 ohms and 20 ohms. However, the optimal value may vary depending on the specific application and switching frequency. It's recommended to consult the datasheet and application notes for more information.
Yes, the FF300R12KS4 can be used in a parallel configuration to increase the current handling capability. However, it's essential to ensure that the modules are properly matched and that the gate drive signals are synchronized to prevent uneven current sharing. Consult the datasheet and application notes for more information on parallel operation.
The maximum allowable voltage transient for the FF300R12KS4 is 1.5 times the maximum rated voltage (Vces) for a duration of 10 microseconds. Exceeding this limit may damage the module. It's essential to ensure that the module is protected from voltage transients and spikes in the application.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FF300R12KS4 Overview
Use the download button to access the FF300R12KS4 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FF300,
or try a keyword search, such as IGBTs
