FOD0710 footprint, schematic symbol and 3D model by onsemi

Symbol

PCB Footprints

3D Models

FOD0710 Details

A good PCB layout for FOD0710 involves keeping the input and output traces as short as possible, using a solid ground plane, and minimizing the distance between the device and the load. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. The EN pin should be tied to a logic high (VCC) to enable the device. The input pins (IN+ and IN-) should be biased to a voltage level that is within the recommended input voltage range.
The FOD0710 can handle a maximum continuous current of 1A per channel. However, it's recommended to derate the current to 0.8A per channel for reliable operation and to prevent overheating.
To protect the FOD0710 from ESD and overvoltage, use TVS diodes or ESD protection devices on the input lines, and consider adding a voltage regulator to regulate the power supply voltage. Additionally, ensure that the PCB layout is designed to minimize the risk of ESD damage.
The recommended operating temperature range for FOD0710 is -40°C to 125°C. However, the device can operate up to 150°C for short periods of time. It's essential to ensure proper thermal management to prevent overheating and ensure reliable operation.

Manufacturer Collaborated

System Verified

Community Approved

Use the download button to access the FOD0710 schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like FOD07, or try a keyword search, such as Optocoupler

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →