Description:Fast Switching Speed Over Full Operating Temperature Range – 210 ns Maximum Propagation Delay – 65 ns Maximum Pulse Width Distortion; Under-Voltage Lockout (UVLO) with Hysteresis; Extended Industrial Temperate Range: -40°C to 100°C; Safety and Regulatory Approvals: – UL1577, 5,000 VRMS for 1 Minute – DIN EN/IEC60747-5-5, 1,140V Peak Working Insulation Voltage; FOD8343T - 8 mm Creepage and Clearance Distance, and 0.4 mm Insulation Distance to Achieve Reliable and High-Voltage Insulation; 4.0 A Peak Output Cu
A good PCB layout for the FOD8343R2 should minimize parasitic inductance and capacitance. Keep the input and output traces short and wide, and use a solid ground plane to reduce noise. A 4-layer PCB with a dedicated power plane and a separate ground plane is recommended.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. The EN pin should be tied to VCC or a logic high signal to enable the device. The input pins (IN+ and IN-) should be biased to a voltage within the recommended common-mode range.
The maximum cable length supported by the FOD8343R2 depends on the specific application and the type of cable used. However, as a general guideline, the device can support cable lengths up to 10 meters (33 feet) for data rates up to 100 Mbps.
To troubleshoot common issues, first verify that the device is properly powered and biased. Check the input signals for correct voltage levels and ensure that the EN pin is properly enabled. Use an oscilloscope to verify the output signals and check for any signs of noise or distortion. If issues persist, consult the onsemi application note AN5086 for further troubleshooting guidance.
Yes, the FOD8343R2 is rated for operation over an industrial temperature range of -40°C to +85°C. However, the device's performance may vary at extreme temperatures, and the user should consult the datasheet for specific temperature-related specifications and limitations.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FOD8343R2 Overview
Use the download button to access the FOD8343R2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FOD83,
or try a keyword search, such as Optocoupler
