Description:Current Transfer Ratio Ranges from 80 to 600% at IF = 5 mA, VCE = 5 V, TA = 25ºC -FODM217A - 80 to 160% - FODM217B - 130 to 260% - FODM217C - 200 to 400% - FODM217D - 300 to 600%; Applicable to Infrared Ray Reflow, 260ºC; Safety and Regulatory Approvals: - UL1577, 3750 VACRMS for 1 min - DIN EN/IEC60747-5-5, 565 V Peak Working Insulation Voltage
The maximum voltage that can be applied to the input pins is 5.5V, which is the absolute maximum rating. However, it's recommended to keep the input voltage below 5V to ensure reliable operation.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground. Also, make sure to decouple the power supply with a 0.1uF capacitor to reduce noise and ensure stable operation.
For optimal performance, keep the input and output traces as short as possible, and avoid running them near noise-sensitive areas. Use a solid ground plane and decouple the power supply to reduce noise. Also, consider using a guard ring around the input pins to reduce noise and EMI.
The FODM217C has built-in ESD protection, but it's still recommended to take precautions during handling and assembly. Use an ESD wrist strap or mat, and handle the device by the body or pins, not the leads. Also, ensure that the PCB is designed with ESD protection in mind, such as using ESD-protection diodes or resistors.
The recommended operating temperature range for the FODM217C is -40°C to 85°C. However, the device can operate up to 125°C, but with reduced performance and reliability.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
FODM217C Overview
Use the download button to access the FODM217C 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like FODM2,
or try a keyword search, such as Optocoupler
