Description:High Noise Immunity characterized by common mode transient immunity (CMTi) - 20kV/µs Minimum CMTi; High Speed – 20Mbit/sec Date Rate (NRZ)– 55ns max. Propagation Delay – 20ns max. Pulse Width Distortion– 30ns max. Propagation Delay Skew; 3.3V and 5V CMOS compatibility; Safety and regulatory approvals – UL1577, 3750 VACRMS for 1 min.– IEC60747-5-2 (pending approval); Specifications guaranteed over 3V to 5.5V supply voltage and -40 to +110°C temperature range
A good PCB layout for FODM8071R2 involves keeping the input and output traces as short as possible, using a solid ground plane, and placing the device close to the load. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure proper biasing, connect the VCC pin to a stable 5V power supply, and the GND pin to a solid ground plane. The EN pin should be tied to a logic high (VCC) to enable the device. Additionally, decouple the VCC pin with a 10uF capacitor to reduce noise and ensure stable operation.
The FODM8071R2 has a maximum current rating of 1A. However, it's recommended to derate the current to 0.8A for continuous operation to ensure reliability and prevent overheating.
To protect the FODM8071R2 from overvoltage and overcurrent conditions, use a voltage regulator to regulate the input voltage to 5V, and add a current-limiting resistor in series with the output to prevent excessive current draw. Additionally, consider adding overvoltage protection (OVP) and overcurrent protection (OCP) circuits to prevent damage from voltage and current surges.
The recommended operating temperature range for the FODM8071R2 is -40°C to 125°C. However, it's recommended to operate the device within a temperature range of 0°C to 85°C for optimal performance and reliability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
FODM8071R2 Overview
Use the download button to access the FODM8071R2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like FODM8,
or try a keyword search, such as Optocoupler
Suggested Parts
If you searched for FODM8071R2, you might also be interested in these parts:
