Part Image

INA210AIDCKRG4 - Texas Instruments

Description: SP Amp Current Shunt Monitor Single 26V 6-Pin SC-70 T/R

Download INA210AIDCKRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
INA210AIDCKRG4 - Texas Instruments PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - DCK (R-PDSO-G6)
click to zoom
3D Models
INA210AIDCKRG4 - Texas Instruments  - 3D model - SOT23 (6-Pin) - DCK (R-PDSO-G6)
click to zoom

INA210AIDCKRG4 Details

  • Manufacturer Part Number:

    INA210AIDCKRG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOIC

  • Package Description:

    SC-70, 6 PIN

  • Pin Count:

    6

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Bias Current-Max (IIB) @25C:

    35 µA

  • Common-mode Reject Ratio-Min:

    105 dB

  • Common-mode Reject Ratio-Nom:

    140 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    35 µV

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Low-Bias:

    NO

  • Low-Offset:

    YES

  • Micropower:

    YES

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    150 °C

  • Operating Temperature-Min:

    -55 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Slew Rate-Nom:

    0.4 V/us

  • Supply Current-Max:

    0.1 mA

  • Supply Voltage Limit-Max:

    26 V

  • Supply Voltage-Nom (Vsup):

    12 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    14

  • Wideband:

    NO

  • Width:

    1.25 mm

INA210AIDCKRG4 Frequently Asked Questions (FAQs)

  • The maximum voltage that can be applied to the input pins is ±40V, but it's recommended to keep it within the common-mode voltage range of ±26V to ensure accurate measurements.
  • The gain error can be calculated using the formula: Gain Error (%) = (Vout / (Gain x Vin)) x 100, where Vout is the output voltage, Gain is the gain setting, and Vin is the input voltage.
  • The CAP pin is used to connect a capacitor to filter out high-frequency noise and improve the accuracy of the measurements. A 10nF to 100nF capacitor is recommended, and it should be connected between the CAP pin and the GND pin.
  • To configure the INA210 for bidirectional current measurement, connect the input pins (VIN+ and VIN-) to the sense resistor, and set the gain to a suitable value. The output voltage will be proportional to the current flowing through the sense resistor, and the direction of the current can be determined by the polarity of the output voltage.
  • The INA210 can handle input frequencies up to 350 kHz, but the bandwidth may be limited by the gain setting and the external components used.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

INA210AIDCKRG4 Overview

Use the download button to access the INA210AIDCKRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like INA21, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to INA210AIDCKRG4

Showing 0 results

INA210AIDCKRG4 Alternates

Showing results

Image Part Number Model
Part Image INA210AIDCKT Texas Instruments

Operational Amplifier, 1 Func, 35uV Offset-Max, BIPolar, PDSO6

Part Image INA210AIDCKR Texas Instruments

Operational Amplifier, 1 Func, 35uV Offset-Max, BIPolar, PDSO6

Part Image INA210AIDCKTG4 Texas Instruments

Operational Amplifier, 1 Func, 35uV Offset-Max, CMOS, PDSO6