Description:The ISL28022 is a bidirectional high-side and low-side digital current sense and voltage monitor with serial interface. The device monitors current and voltage and provides the results digitally along with calculated power. The ISL28022 provides tight accuracy of less than 0. 3% for both voltage and current monitoring over the entire input range. The digital power monitor has configurable fault thresholds and measurable ADC gain ranges. The ISL28022 handles common-mode input voltage ranging from 0V to 60V.
A good PCB layout for the ISL28022FRZ involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
To ensure accurate current sensing, it's essential to follow proper layout and routing guidelines, such as keeping the sense lines short and away from noise sources, using a Kelvin connection, and minimizing the resistance of the sense lines. Additionally, calibrating the device and using a high-accuracy shunt resistor can improve accuracy.
The maximum allowed voltage on the VS pin of the ISL28022FRZ is 28V. Exceeding this voltage can damage the device. It's recommended to use a voltage regulator or a voltage limiter to ensure the voltage on the VS pin does not exceed the maximum rating.
The ISL28022FRZ has a built-in overcurrent detection feature. When an overcurrent condition is detected, the device will latch off and require a power cycle to reset. To handle overcurrent conditions, it's recommended to use an external circuit to detect the latch-off condition and provide a reset signal to the device.
The recommended operating temperature range for the ISL28022FRZ is -40°C to 125°C. Operating the device outside this range can affect its performance and reliability.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
ISL28022FRZ Overview
Use the download button to access the ISL28022FRZ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like ISL28,
or try a keyword search, such as Power Management Circuits
