Texas Instruments recommends a thermal pad on the bottom of the package, connected to a copper plane on the PCB to dissipate heat. A minimum of 2oz copper thickness is recommended. Additionally, vias should be placed under the thermal pad to connect to the copper plane.
To ensure accurate temperature measurement, it is essential to provide a good thermal connection between the device and the target temperature source. This can be achieved by using a thermal interface material (TIM) such as thermal tape or thermal grease. Additionally, the device should be placed close to the target temperature source and away from any heat sources or air flows that may affect the measurement.
The maximum cable length for the I2C interface depends on the capacitance of the cable and the operating frequency. As a general rule, the capacitance of the cable should be kept below 400pF to ensure reliable operation. For a typical I2C cable with a capacitance of 100pF/m, the maximum cable length would be around 4m at 400kHz and 1m at 1MHz.
The POR and BOR features of the LM27CIM5-1HJ/NOPB are designed to ensure that the device resets properly during power-up and power-down sequences. To handle these features, the device should be powered up and down slowly (typically 10ms or more) to allow the POR and BOR circuits to function correctly. Additionally, the device should be connected to a stable power supply with minimal noise and ripple.
Texas Instruments recommends a decoupling capacitor value of 0.1uF to 1uF, with a voltage rating of at least 10V, placed as close as possible to the device's power pins. This capacitor helps to filter out noise and ripple on the power supply lines and ensures stable operation of the device.
Trust Checks
This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
LM27CIM5-1HJ/NOPB Overview
Use the download button to access the LM27CIM5-1HJ/NOPB schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LM27C,
or try a keyword search, such as Temperature Sensors
About Texas Instruments
Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.
