Part Image

LMV711IDBVRG4 - Texas Instruments

Description: Operational Amplifiers - Op Amps Sgl Low-Pwr RRIO Op Amp

Download LMV711IDBVRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LMV711IDBVRG4 - Texas Instruments PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - DBV (R-PDSO-G6)
click to zoom
3D Models
LMV711IDBVRG4 - Texas Instruments  - 3D model - SOT23 (6-Pin) - DBV (R-PDSO-G6)
click to zoom

LMV711IDBVRG4 Details

  • Manufacturer Part Number:

    LMV711IDBVRG4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    SOT-23

  • Package Description:

    SOT-23, 6 PIN

  • Pin Count:

    6

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Bias Current-Max (IIB) @25C:

    0.000004 µA

  • Common-mode Reject Ratio-Min:

    50 dB

  • Common-mode Reject Ratio-Nom:

    75 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    3200 µV

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e4

  • Length:

    2.9 mm

  • Low-Bias:

    YES

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LSSOP

  • Package Equivalence Code:

    TSOP6,.11,37

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, LOW PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.45 mm

  • Slew Rate-Nom:

    5 V/us

  • Supply Current-Max:

    1.9 mA

  • Supply Voltage Limit-Max:

    6 V

  • Supply Voltage-Nom (Vsup):

    2.7 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    NICKEL PALLADIUM GOLD

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.95 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    5000

  • Voltage Gain-Min:

    6300

  • Wideband:

    NO

  • Width:

    1.6 mm

LMV711IDBVRG4 Frequently Asked Questions (FAQs)

  • Texas Instruments recommends a star-ground topology, with the analog and digital grounds separated and connected at a single point. Keep the input and output traces short and away from digital signals. Use a solid ground plane and avoid vias under the device to reduce noise and inductance.
  • Use a combination of ceramic and electrolytic capacitors to decouple the power supply. Place a 0.1uF ceramic capacitor close to the device's power pins, and add a 10uF electrolytic capacitor in parallel. Ensure the capacitors are connected to a solid ground plane and are not shared with other devices.
  • The maximum input voltage is 6V, but it's recommended to limit the input voltage to 5.5V to ensure reliable operation and prevent damage. Exceeding the maximum input voltage can cause permanent damage to the device.
  • The gain of the LMV711IDBVRG4 can be set using external resistors. Use the gain equation provided in the datasheet to calculate the required resistor values. Ensure the resistors are of high precision and low tolerance to maintain accurate gain settings.
  • The recommended operating temperature range for the LMV711IDBVRG4 is -40°C to 125°C. However, the device can operate up to 150°C with reduced performance and reliability. Ensure proper thermal management and heat dissipation to maintain optimal performance.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LMV711IDBVRG4 Overview

Use the download button to access the LMV711IDBVRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LMV71, or try a keyword search, such as Operational Amplifiers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to LMV711IDBVRG4

Showing 0 results

LMV711IDBVRG4 Alternates

Showing results

Image Part Number Model
Part Image LMV715IDBVR Texas Instruments

Operational Amplifier, 1 Func, 3200uV Offset-Max, BICMOS, PDSO6

Part Image LMV715IDBVRG4 Texas Instruments

Operational Amplifier, 1 Func, 3200uV Offset-Max, BICMOS, PDSO6

Part Image LMV715IDBVRE4 Texas Instruments

Operational Amplifier, 1 Func, 3200uV Offset-Max, BICMOS, PDSO6

Part Image LMV711IDBVR Rochester Electronics LLC

Operational Amplifier, 1 Func, 3200uV Offset-Max, BICMOS, PDSO6

Part Image LMV711IDBVRE4 Texas Instruments

Operational Amplifier, 1 Func, 3200uV Offset-Max, BICMOS, PDSO6

For a full list of alternate parts for LMV711IDBVRG4, check out Findchips.com