Part Image

LT1222CS8#PBF - Analog Devices

Description: The LT1222 is a low noise, very high speed operational amplifier with superior DC performance. T

Download LT1222CS8#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
LT1222CS8#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - S8(SOIC)
click to zoom
3D Models
LT1222CS8#PBF - Analog Devices  - 3D model - Small Outline Packages - S8(SOIC)
click to zoom

LT1222CS8#PBF Details

  • Manufacturer Part Number:

    LT1222CS8#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    0.150 INCH, PLASTIC, SOIC-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    05-08-1610 (S8)

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.4 µA

  • Bias Current-Max (IIB) @25C:

    0.3 µA

  • Common-mode Reject Ratio-Min:

    100 dB

  • Common-mode Reject Ratio-Nom:

    120 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    600 µV

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Moisture Sensitivity Level:

    1

  • Neg Supply Voltage Limit-Max:

    -18 V

  • Neg Supply Voltage-Nom (Vsup):

    -15 V

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Power:

    NO

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.75 mm

  • Slew Rate-Min:

    150 V/us

  • Slew Rate-Nom:

    200 V/us

  • Supply Current-Max:

    10.5 mA

  • Supply Voltage Limit-Max:

    18 V

  • Supply Voltage-Nom (Vsup):

    15 V

  • Surface Mount:

    YES

  • Technology:

    BIPOLAR

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Unity Gain BW-Nom:

    500000

  • Voltage Gain-Min:

    100000

  • Wideband:

    YES

  • Width:

    3.9 mm

LT1222CS8#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LT1222CS8 involves keeping the input and output traces short and separate, using a solid ground plane, and placing the input and output capacitors close to the device. A 4-layer PCB with a dedicated power plane and a solid ground plane is recommended.
  • To ensure stability, it's essential to follow the recommended PCB layout, use the correct output capacitor value, and ensure that the input and output impedance are matched. Additionally, adding a small capacitor (e.g., 10pF) between the output and the inverting input can help prevent oscillations.
  • The maximum power dissipation of the LT1222CS8 is 1.4W. To calculate the power dissipation, use the formula: Pd = (Vin - Vout) x Iout, where Vin is the input voltage, Vout is the output voltage, and Iout is the output current.
  • Yes, the LT1222CS8 can be used as a unity-gain buffer. However, it's essential to ensure that the input impedance is matched to the source impedance, and the output impedance is matched to the load impedance. Additionally, the device's bandwidth and slew rate should be considered to ensure that the signal is not distorted.
  • To protect the LT1222CS8 from overvoltage and overcurrent conditions, use voltage regulators and current limiters on the input and output lines. Additionally, consider adding overvoltage protection (OVP) and overcurrent protection (OCP) circuits to prevent damage to the device.

Trust Checks

This model has been provided by an expert contributor.
Expert Contribution
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LT1222CS8#PBF Overview

Use the download button to access the LT1222CS8#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LT122, or try a keyword search, such as Operational Amplifiers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LT1222CS8#PBF

Showing 0 results

LT1222CS8#PBF Alternates

Showing results

Image Part Number Model
Part Image LT1222CS8#TRPBF Analog Devices Inc

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8

Part Image LT1222CS8 Linear Technology

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8

Part Image LT1222CS8#TRPBF Linear Technology

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8

Part Image LT1222CS8#PBF Linear Technology

LT1222 - 500MHz, 3nV/rtHz, AV >=10 Operational Amplifier; Package: SO; Pins: 8; Temperature Range: 0°C to 70°C

Part Image LT1222CS8#TR Analog Devices Inc

Operational Amplifier, 1 Func, 600uV Offset-Max, BIPolar, PDSO8

For a full list of alternate parts for LT1222CS8#PBF, check out Findchips.com