Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC2852HDD#PBF - Analog Devices

Description: RS-422/RS-485 Interface IC 3.3V Full-Duplex 20Mbps RS485 Transceiver w/ Enables

Download LTC2852HDD#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC2852HDD#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC2852HDD#PBF - Analog Devices PCB footprint - Small Outline No-lead - Small Outline No-lead - DD Package1
click to zoom
3D Models
LTC2852HDD#PBF - Analog Devices - 3D model - Small Outline No-lead - DD Package1
click to zoom

LTC2852HDD#PBF Details

  • Manufacturer Part Number:

    LTC2852HDD#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    3 X 3 MM, LEAD FREE, PLASTIC, MO-229WEED-2, DFN-10

  • Pin Count:

    10

  • Manufacturer Package Code:

    05-08-1699

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00001 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485-A; TIA-485-A; EIA-422

  • JESD-30 Code:

    S-PDSO-N10

  • JESD-609 Code:

    e3

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.004 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVSON

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    70 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    0.8 mm

  • Supply Current-Max:

    1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    50 ns

  • Width:

    3 mm

LTC2852HDD#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC2852HDD#PBF involves keeping the analog and digital grounds separate, using a solid ground plane, and placing the device close to the power supply. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane to minimize noise and ensure optimal performance.
  • The LTC2852HDD#PBF requires a single 3.3V or 5V power supply. It's recommended to power the device with a low-noise, low-dropout regulator. The power sequencing requirements involve powering the device in the following order: VCC, then VREF, and finally the analog and digital inputs. It's also recommended to add decoupling capacitors close to the device to filter out noise.
  • The LTC2852HDD#PBF can achieve a maximum data transfer rate of 100 Mbps. However, the actual data transfer rate may vary depending on the system design, PCB layout, and the quality of the transmission lines.
  • To troubleshoot common issues with the LTC2852HDD#PBF, start by checking the power supply and ensuring that the device is properly powered. Then, verify that the device is properly configured and that the transmission lines are properly terminated. Use an oscilloscope to check the signal integrity and look for signs of noise or distortion. If the issue persists, consult the datasheet and application notes for troubleshooting guidelines.
  • The LTC2852HDD#PBF has a maximum junction temperature of 150°C. To ensure the device operates within its recommended temperature range, it's recommended to provide adequate heat sinking, use a thermal interface material, and ensure good airflow around the device. Additionally, it's recommended to follow the thermal design guidelines outlined in the datasheet and application notes.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC2852HDD#PBF Overview

Use the download button to access the LTC2852HDD#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC28, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC2852HDD#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC2852HDD#PBF Alternates

Showing results

Image Part Number Model
Part Image LTC2852CDD Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image LTC2852CDD#TRPBF Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image LTC2852CDD#PBF Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image LTC2852HDD#PBF Linear Technology

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
Part Image LTC2852CDD#TR Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO10
For a full list of alternate parts for LTC2852HDD#PBF, check out Findchips.com