Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC3851IMSE-1#PBF - Analog Devices

Description: Wide VIN Range: 4V to 38V Operation n RSENSE or DCR Current Sensing n ±1% Output Voltage Accuracy n Power Good Output Voltage Monitor n Phase-Lockable Fixed Frequency: 250kHz to 750kHz n Dual N-Channel MOSFET Synchronous Drive n Very Low Dropout Operation: 99% Duty Cycle n Adjustable Output Voltage Soft-Start or Tracking n Output Current Foldback Limiting n Output Overvoltage Protection n OPTI-LOOP® Compensation Minimizes COUT n Selectable Continuous, Pulse-Skipping or Burst Mode® Operation at L

Download LTC3851IMSE-1#PBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC3851IMSE-1#PBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC3851IMSE-1#PBF - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - MSE Package 16-Lead Plastic MSOP, Exposed Die Pad
click to zoom
3D Models
LTC3851IMSE-1#PBF - Analog Devices - 3D model - Small Outline Packages - MSE Package 16-Lead Plastic MSOP, Exposed Die Pad
click to zoom

LTC3851IMSE-1#PBF Details

  • Manufacturer Part Number:

    LTC3851IMSE-1#PBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    LEAD FREE, PLASTIC, MSOP-16

  • Pin Count:

    16

  • Manufacturer Package Code:

    05-08-1667

  • Country Of Origin:

    Thailand

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Additional Feature:

    ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8V TO 5.5V

  • Analog IC - Other Type:

    SWITCHING CONTROLLER

  • Control Mode:

    CURRENT-MODE

  • Control Technique:

    PULSE WIDTH MODULATION

  • Input Voltage-Max:

    38 V

  • Input Voltage-Min:

    4 V

  • Input Voltage-Nom:

    15 V

  • JESD-30 Code:

    R-PDSO-G16

  • JESD-609 Code:

    e3

  • Length:

    4.039 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    16

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Current-Max:

    0.05 A

  • Output Voltage-Max:

    5.5 V

  • Output Voltage-Min:

    0.8 V

  • Output Voltage-Nom:

    3.3 V

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HTSSOP

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    1.1 mm

  • Surface Mount:

    YES

  • Switcher Configuration:

    PUSH-PULL

  • Switching Frequency-Max:

    530 kHz

  • Technology:

    CMOS

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    3 mm

LTC3851IMSE-1#PBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC3851IMSE-1#PBF involves keeping the input and output capacitors close to the IC, using a solid ground plane, and minimizing the length of the traces between the IC and the capacitors. Additionally, it's recommended to use a separate analog ground plane and to keep the power and ground traces separate.
  • The choice of input and output capacitors for the LTC3851IMSE-1#PBF depends on the specific application requirements. In general, low-ESR capacitors with a high ripple current rating are recommended. The input capacitor should be at least 10uF, and the output capacitor should be at least 22uF. X5R or X7R ceramic capacitors are good options.
  • The maximum ambient temperature range for the LTC3851IMSE-1#PBF is -40°C to 125°C. However, the device can operate up to 150°C with derating. It's essential to ensure that the device is operated within the recommended temperature range to ensure reliability and performance.
  • The LTC3851IMSE-1#PBF can be programmed for a specific output voltage using the FB pin. A resistive divider network is required to set the output voltage. The resistors should be chosen such that the voltage at the FB pin is equal to the desired output voltage divided by the gain of the internal error amplifier (typically 0.8V).
  • The maximum input voltage range for the LTC3851IMSE-1#PBF is 3.5V to 36V. However, the device can operate up to 40V with derating. It's essential to ensure that the input voltage is within the recommended range to prevent damage to the device.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC3851IMSE-1#PBF Overview

Use the download button to access the LTC3851IMSE-1#PBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC38, or try a keyword search, such as Switching Regulator or Controllers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC3851IMSE-1#PBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC3851IMSE-1#PBF Alternates

Showing results

Image Part Number Model
Part Image LTC3851EMSE-1#PBF Analog Devices Inc

Switching Controller, Current-mode, 0.05A, 530kHz Switching Freq-Max, CMOS, PDSO16
Part Image LTC3851IMSE-1#TRPBF Linear Technology

Switching Controller, Current-mode, 0.05A, 790kHz Switching Freq-Max, CMOS, PDSO16
Part Image LTC3851EMSE-1#TRPBF Linear Technology

Switching Controller, Current-mode, 0.05A, 530kHz Switching Freq-Max, CMOS, PDSO16
Part Image LTC3851EMSE-1#PBF Linear Technology

Switching Controller, Current-mode, 0.05A, 530kHz Switching Freq-Max, CMOS, PDSO16
Part Image LTC3851IMSE-1#PBF Linear Technology

Switching Controller, Current-mode, 0.05A, 530kHz Switching Freq-Max, CMOS, PDSO16
For a full list of alternate parts for LTC3851IMSE-1#PBF, check out Findchips.com