Please enter a minimum 3 letters or numbers
Technical Content
Part Image

LTC6752HSC6-4#TRMPBF - Analog Devices

Description: Analog Comparators 280MHz CMOS Comparator with Output Supply

Download LTC6752HSC6-4#TRMPBF Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
LTC6752HSC6-4#TRMPBF - Analog Devices - PCB symbol
click to zoom
PCB Footprints
LTC6752HSC6-4#TRMPBF - Analog Devices PCB footprint - SOT23 (6-Pin) - SOT23 (6-Pin) - SC70+
click to zoom
3D Models
LTC6752HSC6-4#TRMPBF - Analog Devices - 3D model - SOT23 (6-Pin) - SC70+
click to zoom

LTC6752HSC6-4#TRMPBF Details

  • Manufacturer Part Number:

    LTC6752HSC6-4#TRMPBF

  • Brand Name:

    Analog Devices Inc

  • Pbfree Code:

    No

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Package Description:

    SC-70, 6 PIN

  • Pin Count:

    6

  • Manufacturer Package Code:

    05-08-1638

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Amplifier Type:

    COMPARATOR

  • Average Bias Current-Max (IIB):

    2.1 µA

  • Bias Current-Max (IIB) @25C:

    1.25 µA

  • Input Offset Voltage-Max:

    8500 µV

  • JESD-30 Code:

    R-PDSO-G6

  • JESD-609 Code:

    e3

  • Length:

    2 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    6

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Output Type:

    OPEN-DRAIN

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    VSSOP

  • Package Equivalence Code:

    TSSOP6,.08

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH

  • Packing Method:

    TR

  • Response Time-Nom:

    2.9 ns

  • Seated Height-Max:

    1 mm

  • Supply Current-Max:

    2.5 mA

  • Supply Voltage Limit-Max:

    5.5 V

  • Supply Voltage-Nom (Vsup):

    2.5 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Matte Tin (Sn)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.65 mm

  • Terminal Position:

    DUAL

  • Width:

    1.25 mm

LTC6752HSC6-4#TRMPBF Frequently Asked Questions (FAQs)

  • A good PCB layout for the LTC6752HSC6-4 involves keeping the input and output traces short and wide, using a solid ground plane, and placing the device close to the power supply bypass capacitors. Additionally, it's recommended to use a 4-layer PCB with a dedicated power plane and a dedicated ground plane.
  • To ensure proper power-up and power-down of the LTC6752HSC6-4, it's recommended to follow a controlled power-up sequence, where the input voltage is ramped up slowly (e.g., 10ms) to prevent inrush currents. During power-down, the input voltage should be ramped down slowly as well. Additionally, it's recommended to use a soft-start circuit to limit the inrush current.
  • The LTC6752HSC6-4 has a maximum junction temperature of 150°C. To ensure reliable operation, it's recommended to keep the device temperature below 125°C. This can be achieved by using a heat sink, improving air flow, and reducing the power dissipation of the device. The thermal resistance of the package is 24°C/W, and the maximum power dissipation is 1.4W.
  • To troubleshoot issues with the LTC6752HSC6-4, start by verifying the power supply voltage and ensuring that it's within the recommended range. Check the input and output voltages, and verify that the device is properly configured. Use an oscilloscope to check for oscillations or other anomalies. If the issue persists, consult the datasheet and application notes, and contact Analog Devices' technical support if necessary.
  • To minimize EMI with the LTC6752HSC6-4, it's recommended to use a shielded enclosure, keep the device away from antennas and other EMI-sensitive components, and use a common-mode choke or ferrite bead on the input and output lines. Additionally, use a low-pass filter on the output to reduce high-frequency noise.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

LTC6752HSC6-4#TRMPBF Overview

Use the download button to access the LTC6752HSC6-4#TRMPBF schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like LTC67, or try a keyword search, such as Comparators

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to LTC6752HSC6-4#TRMPBF

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

LTC6752HSC6-4#TRMPBF Alternates

Showing results

Image Part Number Model
Part Image LTC6752HSC6-4#TRMPBF Linear Technology

Comparator, 1 Func, 8500uV Offset-Max, 5.5ns Response Time, CMOS, PDSO6