Description:Display Modules - LED Character and Numeric Red 7-Segment 2 Character Common Anode 2V 20mA 0.750" H x 0.984" W x 0.315" D (19.05mm x 25.00mm x 8.00mm) 18-DIP (0.600", 15.24mm)
A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a heat sink or a metal plate to dissipate heat efficiently.
Ensure proper heat sinking, use a thermal interface material, and follow the recommended PCB layout. Also, consider using a heat sink with a thermal conductivity of at least 1 W/m-K.
The maximum allowable voltage stress is 1.5 times the maximum rated voltage. Exceeding this limit may cause permanent damage to the device.
Yes, but ensure the device is properly sealed and conformal coated to prevent moisture ingress. Also, follow the recommended storage and handling procedures to prevent moisture absorption.
Use a systematic approach to troubleshoot issues. Check the power supply, input signals, and output loads. Use oscilloscopes and logic analyzers to debug the circuit. Consult the datasheet and application notes for guidance.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
LTD-6910HR Overview
Use the download button to access the LTD-6910HR 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like LTD-6,
or try a keyword search, such as LED Displays
