Part Image

MAX3486ESA+ - Analog Devices

Description: MAX3486ESA+, Line Transceiver, RS-485, RS-422 2.5Mbit/s Differential, 3.3 V, 8-Pin SOIC

Download MAX3486ESA+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MAX3486ESA+ - Analog Devices PCB footprint - Small Outline Packages - Small Outline Packages - 8 SO-3
click to zoom
3D Models
MAX3486ESA+ - Analog Devices  - 3D model - Small Outline Packages - 8 SO-3
click to zoom

MAX3486ESA+ Details

  • Manufacturer Part Number:

    MAX3486ESA+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    8-SOIC_N-150_MIL

  • Package Description:

    0.150 INCH, SO-8

  • Pin Count:

    8

  • Manufacturer Package Code:

    8-SOIC_N-150_MIL

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    1994-12-01

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    9

  • Additional Feature:

    COMMON I/O; 1 RECEIVER ACTIVE UNDER SHUTDOWN; TRISTATABLE RECEIVER

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422; EIA-485

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e3

  • Length:

    4.9 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.0025 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.25

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    90 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    2.2 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    70 ns

  • Width:

    3.9 mm

MAX3486ESA+ Frequently Asked Questions (FAQs)

  • A good layout and routing practice for the MAX3486ESA+ involves keeping the analog and digital grounds separate, using a solid ground plane, and minimizing the length of the traces between the device and the capacitors. Additionally, it's recommended to use a shielded cable for the RS-485 bus and to keep the bus away from noisy signals.
  • To ensure reliable communication in a noisy industrial environment, use a shielded cable, twisted pair wiring, and implement error-checking mechanisms such as CRC or checksum in the protocol. Additionally, consider using a common-mode choke or a ferrite bead to filter out high-frequency noise.
  • The maximum cable length supported by the MAX3486ESA+ depends on the baud rate, cable characteristics, and noise environment. As a general guideline, the maximum cable length is around 4000 feet (1219 meters) at 115.2 kbps, but it's recommended to consult the datasheet and perform tests to determine the maximum cable length for a specific application.
  • The MAX3486ESA+ can be configured for half-duplex or full-duplex operation by controlling the DE (driver enable) and RE (receiver enable) pins. For half-duplex operation, tie DE and RE together and connect them to a single control signal. For full-duplex operation, connect DE to the transmitter enable signal and RE to the receiver enable signal.
  • The recommended termination scheme for the MAX3486ESA+ is a 120-ohm termination resistor at each end of the RS-485 bus, with a common-mode termination resistor (Rcm) of 220 ohm to 330 ohm. This termination scheme helps to reduce reflections, improve signal integrity, and increase noise immunity.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX3486ESA+ Overview

Use the download button to access the MAX3486ESA+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX34, or try a keyword search, such as Line Driver or Receivers

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX3486ESA+

Showing 0 results

MAX3486ESA+ Alternates

Showing results

Image Part Number Model
Part Image MAX3486ESA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image MAX3486ESA Maxim Integrated Products

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8