Please enter a minimum 3 letters or numbers
Technical Content
Part Image

MAX4810CTN+ - Analog Devices

Description: MAXIM INTEGRATED PRODUCTS - MAX4810CTN+ - High Voltage Digital Pulser, 2.7 V to 6 V, TQFN-56

Download MAX4810CTN+ Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
MAX4810CTN+ - Analog Devices - PCB symbol
click to zoom
PCB Footprints
MAX4810CTN+ - Analog Devices PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - T5677+1
click to zoom
3D Models
MAX4810CTN+ - Analog Devices - 3D model - Quad Flat No-Lead - T5677+1
click to zoom

MAX4810CTN+ Details

  • Manufacturer Part Number:

    MAX4810CTN+

  • Brand Name:

    Analog Devices Inc

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    56-LFCSP-7X7X0.75

  • Package Description:

    7 X 7 MM, ROHS COMPLIANT, TQFN-56

  • Pin Count:

    56

  • Manufacturer Package Code:

    56-LFCSP-7X7X0.75

  • Country Of Origin:

    Japan, Mainland China, Malaysia, Philippines, Singapore, South Korea, Taiwan, Thailand, USA

  • HTS Code:

    8542.39.00.60

  • Date Of Intro:

    2008-11-03

  • Manufacturer:

    Analog Devices Inc

  • YTEOL:

    10

  • Consumer IC Type:

    CONSUMER CIRCUIT

  • JESD-30 Code:

    S-XQCC-N56

  • JESD-609 Code:

    e3

  • Length:

    8 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    2

  • Number of Terminals:

    56

  • Operating Temperature-Max:

    70 °C

  • Package Body Material:

    UNSPECIFIED

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC56,.31SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Seated Height-Max:

    0.8 mm

  • Surface Mount:

    YES

  • Temperature Grade:

    COMMERCIAL

  • Terminal Finish:

    Matte Tin (Sn) - annealed

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    8 mm

MAX4810CTN+ Frequently Asked Questions (FAQs)

  • The recommended layout and routing for the MAX4810CTN+ involves keeping the transmitter and receiver sections separate, using a ground plane to reduce noise, and minimizing the length of the traces between the IC and the transceiver. A 4-layer PCB with a dedicated ground plane is recommended. Additionally, the datasheet provides a recommended layout and routing diagram that should be followed.
  • To ensure reliable operation of the MAX4810CTN+ in noisy environments, it is recommended to use a common-mode choke or a ferrite bead on the RS-485 bus, and to use a shielded cable. Additionally, the MAX4810CTN+ has a built-in fail-safe feature that guarantees a logic-high output state when the inputs are shorted or open. This feature helps to prevent errors in noisy environments.
  • The maximum cable length supported by the MAX4810CTN+ depends on the data rate and the type of cable used. As a general rule, the maximum cable length is inversely proportional to the data rate. For example, at a data rate of 10Mbps, the maximum cable length is approximately 50 feet (15 meters), while at a data rate of 100kbps, the maximum cable length is approximately 4000 feet (1200 meters).
  • The MAX4810CTN+ requires a termination scheme to prevent signal reflections and ensure reliable data transmission. A common termination scheme involves using a 120Ω resistor at the end of the bus, and a 220Ω resistor in series with a 220pF capacitor at the receiver end. The datasheet provides more information on the recommended termination scheme.
  • The power-up sequence for the MAX4810CTN+ involves powering up the VCC supply before the DE (driver enable) and RE (receiver enable) inputs. This ensures that the IC is properly initialized and configured before the transmitter and receiver are enabled.

Trust Checks

This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MAX4810CTN+ Overview

Use the download button to access the MAX4810CTN+ schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MAX48, or try a keyword search, such as Other Consumer ICs

About Analog Devices

Analog Devices Inc. is a global leader in the design and manufacturing of analog, mixed-signal, and digital signal processing integrated circuits and software solutions for the industrial, automotive, healthcare, communications industries. Analog Devices serves a diverse range of markets including industrial, automotive, healthcare, energy, aerospace, defense, and consumer electronics industries. Analog Devices’ product portfolio includes a wide range of ICs, modules, and subsystems.

Parts related to MAX4810CTN+

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑

MAX4810CTN+ Alternates

Showing results

Image Part Number Model
Part Image MAX4810CTN+ Maxim Integrated Products

Consumer Circuit, QCC56