Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the signal traces as short as possible to minimize inductance and radiation. A 4-layer PCB with a dedicated ground plane is ideal.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Ensure the component is properly aligned and seated before soldering. Avoid applying excessive heat or force, which can damage the component.
The MF-FSHT005KX-2 is rated for operation from -40°C to 125°C, but derating is required above 85°C. Consult the datasheet for specific derating curves.
Yes, the MF-FSHT005KX-2 is designed to withstand vibrations up to 10g peak acceleration. However, it's essential to ensure the component is properly secured to the PCB and the PCB is adequately mounted to the system to prevent mechanical stress.
Use proper ESD protection equipment, such as wrist straps, mats, and packaging materials, to prevent static electricity damage. Ground yourself before handling the component, and avoid touching the pins or leads.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MF-FSHT005KX-2 Overview
Use the download button to access the MF-FSHT005KX-2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MF-FS,
or try a keyword search, such as Non-linear Resistors
