Bourns recommends a symmetrical PCB layout with a solid ground plane, and keeping the signal traces as short as possible to minimize inductance and radiation. A 4-layer PCB with a dedicated ground plane is also recommended.
Use a soldering iron with a temperature of 250°C to 260°C, and apply a small amount of solder paste to the pads. Ensure the component is properly aligned and seated on the PCB before soldering. Avoid applying excessive heat or force, which can damage the component.
The MF-FSHT016KX-2 is rated for operation from -40°C to 125°C, but it's recommended to derate the component's performance at temperatures above 85°C to ensure reliability and longevity.
Yes, the MF-FSHT016KX-2 is designed to withstand vibrations up to 10g peak acceleration, but it's recommended to follow proper mounting and soldering techniques to ensure the component remains securely attached to the PCB.
Start by verifying the component is properly soldered and seated on the PCB. Check for any signs of physical damage or overheating. Use a multimeter to measure the component's resistance and inductance, and compare the results to the datasheet specifications. If issues persist, consult the datasheet or contact Bourns' technical support for further assistance.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MF-FSHT016KX-2 Overview
Use the download button to access the MF-FSHT016KX-2 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MF-FS,
or try a keyword search, such as Non-linear Resistors
