Description:This device is designed for low-level analog switching
sample-and-hold circuits and chopper-stabilized
amplifiers. Sourced from process 88.
The MMBFJ177 can operate safely between -55°C to 150°C, but the recommended operating temperature range is -40°C to 125°C for optimal performance.
To ensure linear operation, the MMBFJ177 should be biased with a collector-emitter voltage (Vce) between 2V to 10V, and a base-emitter voltage (Vbe) between 0.6V to 1.4V. Additionally, the collector current (Ic) should be limited to the recommended maximum value to prevent thermal runaway.
The maximum collector current (Ic) for the MMBFJ177 is 3A, but it's recommended to limit it to 2A for continuous operation to ensure reliability and prevent overheating.
To protect the MMBFJ177 from ESD, handle the device with an anti-static wrist strap or mat, and ensure that the circuit board is designed with ESD protection in mind, such as using ESD protection diodes or resistors.
Yes, the MMBFJ177 can be used as a switch, but it's not recommended due to its relatively low current gain (hFE) and high saturation voltage (Vce(sat)). For switching applications, consider using a transistor with a higher current gain and lower saturation voltage.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
MMBFJ177 Overview
Use the download button to access the MMBFJ177 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MMBFJ,
or try a keyword search, such as Small Signal Field-Effect Transistors
Suggested Parts
If you searched for MMBFJ177, you might also be interested in these parts:
