SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH
Seated Height-Max:
1.2 mm
Supply Voltage-Max (Vsup):
36 V
Supply Voltage-Min (Vsup):
9.5 V
Surface Mount:
YES
Temperature Grade:
AUTOMOTIVE
Terminal Finish:
Matte Tin (Sn)
Terminal Form:
GULL WING
Terminal Pitch:
0.65 mm
Terminal Position:
DUAL
Width:
4.4 mm
MP7748SGF-Z Frequently Asked Questions (FAQs)
A good PCB layout for the MP7748SGF-Z should prioritize thermal dissipation. Place the device near a thermal pad or a heat sink, and ensure good airflow around the component. Use thick copper traces for the power paths and keep the switching node (SW) as short as possible to minimize EMI.
To optimize the compensation network, start with the recommended values in the datasheet. Then, adjust the compensation components (Rcomp, Ccomp) based on the specific application's output capacitor and load characteristics. Use simulation tools or empirical methods to fine-tune the compensation for optimal transient response.
When selecting the output capacitor, consider the capacitance value, ESR, and voltage rating. A low-ESR capacitor (e.g., ceramic or polymer) is recommended to minimize voltage ripple and ensure stability. The capacitor's voltage rating should be at least 1.5 times the output voltage to ensure reliability.
Monitor the device's junction temperature (TJ) and ensure it stays within the recommended range (-40°C to 125°C). Also, keep the input voltage within the specified range (4.5V to 18V) and avoid exceeding the maximum current rating (8A).
The MP7748SGF-Z is a high-current, high-efficiency synchronous buck converter with a wide input voltage range. It differs from other devices in the same family (e.g., MP7748SGF-V) in terms of its specific feature set, such as the maximum current rating, switching frequency, and package type.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
MP7748SGF-Z Overview
Use the download button to access the MP7748SGF-Z 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like MP774,
or try a keyword search, such as Audio/Video Amplifiers
