Part Image

MSP430F148IPMG4 - Texas Instruments

Description: 16-bit Microcontrollers - MCU 16-Bit Ultra-Low-Power Microcontroller, 48 kB Flash, 2KB RAM, 12 bit ADC, 2 USARTs, HW multiplier 64-LQFP -40 to 85

Download MSP430F148IPMG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MSP430F148IPMG4 - Texas Instruments PCB footprint - Quad Flat Packages - Quad Flat Packages - PM (S-PQFP-G64)
click to zoom
3D Models
MSP430F148IPMG4 - Texas Instruments  - 3D model - Quad Flat Packages - PM (S-PQFP-G64)
click to zoom

MSP430F148IPMG4 Details

  • Manufacturer Part Number:

    MSP430F148IPMG4

  • Brand Name:

    Texas Instruments

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Obsolete

  • Part Package Code:

    QFP

  • Package Description:

    LQFP-64

  • Pin Count:

    64

  • Country Of Origin:

    Philippines, Taiwan

  • HTS Code:

    8542.31.00.20

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    0

  • Has ADC:

    YES

  • Additional Feature:

    ALSO OPERATES AT 1.8V MINIMUM SUPPLY AT 4.15 MHZ

  • Bit Size:

    16

  • CPU Family:

    MSP430

  • Clock Frequency-Max:

    8 MHz

  • DAC Channels:

    NO

  • DMA Channels:

    NO

  • JESD-30 Code:

    S-PQFP-G64

  • JESD-609 Code:

    e4

  • Length:

    10 mm

  • Moisture Sensitivity Level:

    3

  • Number of I/O Lines:

    48

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • RAM (bytes):

    2048

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.6 mm

  • Speed:

    8 MHz

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    2.7 V

  • Supply Voltage-Nom:

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

MSP430F148IPMG4 Frequently Asked Questions (FAQs)

  • The maximum operating temperature range for the MSP430F148IPMG4 is -40°C to 85°C, but it can be extended to -40°C to 105°C with some limitations on the clock frequency and supply voltage.
  • To configure the MSP430F148IPMG4 for low-power operation, you can use the Power Management Module (PMM) to control the power modes, such as LPM0, LPM1, LPM2, LPM3, and LPM4. You can also use the Dynamic Voltage Scaling (DVS) feature to adjust the supply voltage based on the clock frequency.
  • The maximum clock frequency for the MSP430F148IPMG4 is 16 MHz, but it can be adjusted using the Digital Frequency Locked Loop (DFLL) or the Internal Very Low Power Low Frequency Oscillator (VLO) for lower power consumption.
  • The USCI module on the MSP430F148IPMG4 can be configured for UART, SPI, or I2C communication. You need to configure the USCI module using the UCAxCTL0, UCAxCTL1, and UCAxBR0 registers, and then use the corresponding interrupt vectors to handle the data transmission and reception.
  • The JTAG interface on the MSP430F148IPMG4 is used for debugging and programming the device. It allows you to connect a JTAG debugger or programmer, such as the Texas Instruments XDS100, to the device and perform tasks such as flash programming, breakpoints, and single-stepping.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MSP430F148IPMG4 Overview

Use the download button to access the MSP430F148IPMG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MSP43, or try a keyword search, such as Microcontrollers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to MSP430F148IPMG4

Showing 0 results

MSP430F148IPMG4 Alternates

Showing results

Image Part Number Model
Part Image MSP430F148IPM Texas Instruments

RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 8MHz, CMOS, PQFP64