Part Image

MSP430FE4252IPM - Texas Instruments

Description: TEXAS INSTRUMENTS - MSP430FE4252IPM - MCU, 16BIT, MSP430, 8MHZ, LQFP-64

Download MSP430FE4252IPM Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
MSP430FE4252IPM - Texas Instruments PCB footprint - Quad Flat Packages - Quad Flat Packages - PM0064A 2021
click to zoom
3D Models
MSP430FE4252IPM - Texas Instruments  - 3D model - Quad Flat Packages - PM0064A 2021
click to zoom

MSP430FE4252IPM Details

  • Manufacturer Part Number:

    MSP430FE4252IPM

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFP

  • Pin Count:

    64

  • Country Of Origin:

    Philippines, Taiwan

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.31.00.30

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Has ADC:

    YES

  • Additional Feature:

    ALSO OPERATES AT 1.8 V MINIMUM SUPPLY AT 4.15 MHZ

  • Bit Size:

    16

  • Boundary Scan:

    YES

  • CPU Family:

    MSP430

  • Clock Frequency-Max:

    8.4 MHz

  • DAC Channels:

    NO

  • DMA Channels:

    NO

  • Format:

    FIXED POINT

  • Integrated Cache:

    NO

  • JESD-30 Code:

    S-PQFP-G64

  • JESD-609 Code:

    e4

  • Length:

    10 mm

  • Low Power Mode:

    YES

  • Moisture Sensitivity Level:

    3

  • Number of I/O Lines:

    14

  • Number of Serial I/Os:

    1

  • Number of Terminals:

    64

  • Number of Timers:

    4

  • On Chip Data RAM Width:

    8

  • On Chip Program ROM Width:

    8

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • PWM Channels:

    YES

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    LFQFP

  • Package Equivalence Code:

    QFP64,.47SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    FLATPACK, LOW PROFILE, FINE PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • RAM (bytes):

    512

  • RAM (words):

    0.5

  • ROM (words):

    16384

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1.6 mm

  • Speed:

    8.4 MHz

  • Supply Current-Max:

    0.5 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    10 mm

  • uPs/uCs/Peripheral ICs Type:

    MICROCONTROLLER, RISC

MSP430FE4252IPM Frequently Asked Questions (FAQs)

  • The maximum operating temperature range for the MSP430FE4252IPM is -40°C to 85°C, as specified in the datasheet. However, it's essential to note that the device can operate at a reduced frequency and voltage at higher temperatures.
  • To configure the MSP430FE4252IPM for low-power operation, you can use the Power Management Module (PMM) to control the power modes. You can also use the Low Power Mode 3 (LPM3) or Low Power Mode 4 (LPM4) to reduce power consumption. Additionally, you can disable unused peripherals and use the clock system to reduce power consumption.
  • The maximum clock frequency for the MSP430FE4252IPM is 16 MHz, which can be achieved using an external crystal oscillator or a high-frequency internal digitally controlled oscillator (DCO). However, the maximum clock frequency may vary depending on the specific application and operating conditions.
  • The MSP430FE4252IPM has a built-in watchdog timer (WDT) that can be enabled and configured using the WDT control registers. You can set the watchdog timer interval and enable it to reset the device in case of a software fault or hang-up. The WDT can also be used to implement a periodic interrupt.
  • Yes, the MSP430FE4252IPM can operate with a 3.3V power supply. The device has a wide operating voltage range of 1.8V to 3.6V, making it suitable for use with 3.3V power supplies. However, it's essential to ensure that the power supply is stable and within the recommended operating voltage range.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

MSP430FE4252IPM Overview

Use the download button to access the MSP430FE4252IPM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like MSP43, or try a keyword search, such as Microcontrollers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to MSP430FE4252IPM

Showing 0 results

MSP430FE4252IPM Alternates

Showing results

Image Part Number Model
Part Image MSP430FE4252IPMR Texas Instruments

RISC Microcontroller, 16-Bit, FLASH, MSP430 CPU, 8.4MHz, CMOS, PQFP64