Description:Complementary Pairs Simplifies Designs; Low Collector Emitter Saturation Voltage VCE(sat) = 1.0 Volt Max @ 8.0 Amperes; Lead Formed for Surface Mount Application in Plastic Sleeves (No Suffix); Straight Lead Version in Plastic Sleeves ("-1" Suffix); Lead Formed Version in 16 mm Tape and Reel for Surface Mount ("T4" Suffix); Electrically Similar to Popular D44H/D45H Series; Fast Switching Speeds; NJV Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC-Q101
A 1-10uF ceramic capacitor (X5R or X7R dielectric) is recommended for input decoupling, placed as close to the VIN pin as possible.
Use a 10kΩ to 22kΩ resistor divider network between the output and ADJ pins to set the desired output voltage, and ensure the output capacitor is a low-ESR type (e.g., ceramic or OS-CON).
The absolute maximum input voltage is 18V, but it's recommended to operate within the specified 15V maximum rating to ensure reliable operation and minimize stress on the device.
The NJVMJD45H11G is rated for operation up to 125°C, but thermal derating applies above 85°C. Ensure proper heat sinking and thermal management to maintain a safe junction temperature.
Use a TVS (transient voltage suppressor) diode or a voltage clamp circuit at the input to protect the device from voltage spikes and surges.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
NJVMJD45H11G Overview
Use the download button to access the NJVMJD45H11G 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like NJVMJ,
or try a keyword search, such as Power Bipolar Transistors
