A 2-layer or 4-layer PCB with a solid ground plane and thermal vias is recommended. Keep the thermal path short and use a thermal pad under the device.
Ensure good thermal management, use a heat sink if necessary, and follow the recommended operating conditions. Monitor the device's junction temperature (Tj) and adjust the design accordingly.
The maximum allowed voltage on the enable pin (EN) is VCC + 0.3V. Exceeding this voltage may damage the device.
No, the NZT560 is designed as a low-side switch. Using it as a high-side switch may lead to incorrect operation or damage to the device.
Use a soft-start circuit or a current limiter to control the inrush current during startup. This prevents excessive current spikes and ensures reliable operation.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
NZT560 Overview
Use the download button to access the NZT560 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like NZT56,
or try a keyword search, such as Small Signal Bipolar Transistors