Part Image

PA75CX - Apex Microtechnology

Description: The PA75 is a single chip, dual power operational amplifier capable of 2.5A of continuous output current on 5V to 40V single supplies. The IC design of the PA75 utilizes a dual power amplifier on a single monolithic die. Side B of the chip is configured as a unity gain buffer to increase the current capability of the side A “master”. Two PA75 amplifiers can be used to provide a cost effective solution for applications where multiple amplifiers are required or a bridge configuration is needed. Very low harmo

Download PA75CX Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
3D Models
PA75CX - Apex Microtechnology  - 3D model
click to zoom
Note! To download footprints and symbols, use the build and request forms below

Build

Launch Build Wizard
Build Wizard not available for this package category!

Request (48 hours)

PA75CX Details

  • Manufacturer Part Number:

    PA75CX

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SFM

  • Pin Count:

    3

  • Country Of Origin:

    USA

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.33.00.01

  • Manufacturer:

    Apex Microtechnology Inc

  • YTEOL:

    5.05

  • Amplifier Type:

    OPERATIONAL AMPLIFIER

  • Architecture:

    VOLTAGE-FEEDBACK

  • Average Bias Current-Max (IIB):

    0.5 µA

  • Bias Current-Max (IIB) @25C:

    0.5 µA

  • Common-mode Reject Ratio-Nom:

    90 dB

  • Frequency Compensation:

    YES

  • Input Offset Voltage-Max:

    15000 µV

  • JESD-30 Code:

    R-PZFM-T7

  • JESD-609 Code:

    e3

  • Low-Bias:

    NO

  • Low-Offset:

    NO

  • Micropower:

    NO

  • Number of Functions:

    2

  • Number of Terminals:

    7

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    ZIP

  • Package Equivalence Code:

    ZIP7,.15,.2TB

  • Package Shape:

    RECTANGULAR

  • Package Style:

    FLANGE MOUNT

  • Power:

    YES

  • Programmable Power:

    NO

  • Qualification Status:

    Not Qualified

  • Slew Rate-Min:

    1 V/us

  • Slew Rate-Nom:

    1.4 V/us

  • Supply Current-Max:

    10 mA

  • Supply Voltage Limit-Max:

    40 V

  • Supply Voltage-Nom (Vsup):

    30 V

  • Surface Mount:

    NO

  • Technology:

    BIPOLAR

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    MATTE TIN

  • Terminal Form:

    THROUGH-HOLE

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    ZIG-ZAG

  • Unity Gain BW-Nom:

    1400

  • Voltage Gain-Min:

    28000

  • Wideband:

    NO

PA75CX Frequently Asked Questions (FAQs)

  • Apex Microtechnology recommends a 2-layer or 4-layer PCB with a thermal relief pattern on the bottom layer to ensure good heat dissipation. A minimum of 2 oz copper thickness is recommended for the top and bottom layers.
  • To ensure reliable operation at high temperatures, Apex recommends derating the output current and voltage according to the thermal derating curve provided in the datasheet. Additionally, ensure good airflow and thermal management around the device.
  • Apex recommends using a low-ESR ceramic capacitor (e.g., X5R or X7R) with a value of 10-22 μF for the input capacitor. This helps to filter out high-frequency noise and ensure stable operation.
  • Apex recommends using external overvoltage protection (OVP) and overcurrent protection (OCP) circuits to prevent damage to the device. The OVP circuit should be set to trigger at 1.5-2 times the maximum rated voltage, and the OCP circuit should be set to trigger at 1.5-2 times the maximum rated current.
  • Apex recommends a soft-start sequence to prevent inrush currents and ensure reliable startup. The recommended sequence is: 1) Apply input voltage, 2) Wait for the internal undervoltage lockout (UVLO) to release, and 3) Apply the enable signal.

Trust Checks

No trust score is available for this model.
Trust Score Unavailable
Sponsored

PA75CX Overview

Use the download button to access the PA75CX 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PA75C, or try a keyword search, such as Operational Amplifiers

Parts related to PA75CX

Showing 0 results

Select Package Category

Package Categories

Datasheet PDF Preview