Showing 25 of 199 results
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|
Image | Part Number | D.S | Description | Package Category | Prices / Stock | Model | Action |
---|---|---|---|---|---|---|---|
|
PA61M
Apex Microtechnology
|
1 | Operational Amplifiers - Op Amps Linear OpAmp, 90V, 10A DSCC Compliant | Other | PA61M |
3
|
Download Model |
|
PA12H
Apex Microtechnology
|
1 | Operational Amplifiers - Op Amps Linear OpAmp, 90V, 10A High Temp | Other | PA12H |
3
|
Download Model |
|
HS09
Apex Microtechnology
|
1 | HS09 is a heatsink designed to integrate with the Apex TO-3 package (CE) | Other | HS09 |
3
|
Download Model |
|
PA78DK
Apex Microtechnology
|
1 | The PA78 is a 350V power operational amplifier with a novel input stage that provides extremely high slew rates in pulse applications while maintaining low quiescent current of under 2.5mA. This novel input stage also has the effect of adding variables to the power response and slew rate characteristics of the amplifier. The output stages for this amplifier are well protected with user defined current limit. External phase compensation provides the user with great flexibility in trading gain, stability, an | Other | PA78DK |
3
|
Download Model |
|
PA15AFU
Apex Microtechnology
|
1 | 450V, 200mA Power Amplifier with Low Standby Current, Low quiescent current – 3.0mA MAX, rogrammable current limit package FU 10‐Pin SIP w/ formed leads | Other | PA15AFU |
2
|
Download Model |
|
PA341CE
Apex Microtechnology
|
1 | 350V, 120mA Power Amplifier with Low Standby Current | Other | PA341CE |
3
|
Download Model |
|
PA441DW
Apex Microtechnology
|
1 | 350V Low Noise Power Amplifier, Voltage supply operation - 350V, Low 12µV RMS noise at 20kHz bandwidth, Low voltage offset 5mV typical at +25°C, High output current - 120mA PEAK. | Other | PA441DW |
3
|
Download Model |
|
PA74A
Apex Microtechnology
|
1 | Operational Amplifiers - Op Amps Linear OpAmp, 40V, 3A, Dual | Other | PA74A |
3
|
Download Model |
|
PA75CC
Apex Microtechnology
|
1 | The PA75 is a single chip, dual power operational amplifier capable of 2.5A of continuous output current on 5V to 40V single supplies. The IC design of the PA75 utilizes a dual power amplifier on a single monolithic die. Side B of the chip is configured as a unity gain buffer to increase the current capability of the side A “master”. Two PA75 amplifiers can be used to provide a cost effective solution for applications where multiple amplifiers are required or a bridge configuration is needed. Very low harmo | Other | PA75CC |
3
|
Download Model |
|
VRE104CA
Apex Microtechnology
|
1 | The VRE104 precision Integrated Circuit provides ultra-stable +4.5V output with up to ±0.8mV initial accuracy and temperature coefficient as low as 1.48 ppm/°C over the full military temperature range. Superior stability, accuracy and quality make the VRE104 ideal for all precision applications which may require a 4.5V reference. High accuracy test and measurement instrumentation, and transducer excitation, are some other applications which can benefit from the high accuracy of the VRE104. The VRE104 is av | Other | VRE104CA |
3
|
Download Model |
|
PA84M/883
Apex Microtechnology
|
1 | The PA84 is a 300V power operational amplifier designed for output voltage swings up to ±145V with dual supplies, or 290V single supply. Two additional versions are available. The PA84S is a fast settling version that can absorb differential input over voltages up to 100V. The base model PA84 and A grade version PA84A can handle differential input over voltages of up to 600V. Target applications include high voltage instrumentation, electrostatic transducers and deflection, and programmable power supplies. | Other | PA84M/883 |
3
|
Download Model |
|
PA16
Apex Microtechnology
|
1 | The PA16 is a wideband power operational amplifier featuring 350kHz of power bandwidth and 5A of output current. Target applications include driving resistive, inductive and capacitive loads such as motors, magnetic deflection and power transducers. A complementary “collector output” stage can swing close to the supply rails and is protected against inductive kickback. For optimum linearity, the output stage is biased for Class A/B operation. The safe operating area (SOA) can be observed for all operating | Other | PA16 |
3
|
Download Model |
|
PA61M/883
Apex Microtechnology
|
1 | Operational Amplifiers - Op Amps Linear OpAmp, 90V, 10A DSCC Compliant | Other | PA61M/883 |
3
|
Download Model |
|
PA10M
Apex Microtechnology
|
1 | The PA10 is a 5A, 100V power operational amplifier with an exceptional 4MHz of gain bandwidth product. Target applications include driving resistive, inductive and capacitive loads such as motors, magnetic deflection, and programmable power supplies. For optimum linearity, especially at low levels, the output stage is biased in the Class A/B mode. The safe operating area (SOA) can be observed for all operating conditions by selection of user programmable current limit resistors, and the amplifier is intern | Other | PA10M |
3
|
Download Model |
|
PA98EE
Apex Microtechnology
|
1 | 1000V/µs, 450V Power Amplifier in PowerSIP | Other | PA98EE |
2
|
Download Model |
|
PA443DF
Apex Microtechnology
|
1 | Representing a fourth product iteration, the PA44X series provides next generation performance based on the PA34X product family (no longer supported for design in). These new IC designs leverage improvements in a specialty high voltage process to provide a staggering 96 percent reduction in signal noise and an equally impressive 2X improvement on offset voltage. For piezo positioning applications, a low noise rating of 12µV RMS at 20kHz bandwidth (Cc = 68pF) makes the PA441DF/PA441DW/PA443DF the amplifiers | Small Outline Packages | PA443DF |
3
|
Download Model |
|
SA310KR
Apex Microtechnology
|
1 | The SA310 is a fully integrated three-phase driver designed primarily to drive Brushless DC (BLDC) and Permanent Magnet Synchronous (PMSM) motors or DC/AC converters. The module uses Silicon Carbide MOSFET technology to improve efficiency over other devices in its class. Three independent half-bridges provide up to 80A peak output current under direct microcontroller or DSC control. SA310 is built on a thermally conductive, but electrically isolated substrate to provide the most versatility and ease in heat | Other | SA310KR |
3
|
Download Model |
|
PA93EE
Apex Microtechnology
|
1 | 400V, 8A Power Amplifier in PowerSIP with Low Standby Current, Low quiescent current – 10mA, High output current – 8A continuous, 14A PEAK, Programmable current limit, Package EE 12-Pin SIP w/ formed leadsn | Other | PA93EE |
2
|
Download Model |
|
SA57AHU
Apex Microtechnology
|
1 | The SA57 is a low cost, 60V, pulse width modulation (PWM) motor driver IC capable of delivering up to 17A of output current. As a monolithic, single package solution, the SA57 provides a high level of integration for driving brush-type DC motors in the market space between lower current devices and higher cost drivers operating on 400+ voltage supplies. A seamless digital interface is possible with the SA57AHU by partnering with either a MCU or DSP. Individual control of both the top side and the bottom sid | Other | SA57AHU |
3
|
Download Model |
|
PA92EE
Apex Microtechnology
|
1 | The PA92 is a 4A (7A PEAK), 400V power operational amplifier that exhibits a very low 10mA of quiescent current. The safe operating area (SOA) has no second breakdown limitations and can be observed for all load types by choosing an appropriate current limiting resistor. The MOSFET output stage is biased AB for linear operation and external compensation provides flexibility in choosing bandwidth and slew rate for the application. Housed in a space-saving, electrically isolated 12-pin PowerSIP package, the | Other | PA92EE |
2
|
Download Model |
|
PA95RC
Apex Microtechnology
|
1 | 900V, 1.6mA Power Amplifier with Low Standby Current, High voltage – 900V (±450V), Low quiescent current – 1.6mA, High output current – 100mA continuous, 200mA PEAK.n | Other | PA95RC |
3
|
Download Model |
|
PA83A
Apex Microtechnology
|
1 | Operational Amplifiers - Op Amps Linear OpAmp, 300V .075A A Grade | Other | PA83A |
3
|
Download Model |
|
PA08
Apex Microtechnology
|
1 | The PA08 is a high voltage power operational amplifier designed for output voltage swings up to ±145V with a dual supply, or a 290V single supply. This power amplifier delivers high accuracy via a cascode input circuit configuration. All internal biasing is referenced to a zener diode fed by a FET constant current source. As a result, the PA08 features an unprecedented supply range and excellent supply rejection. Target applications for this POA include electrostatic transducers, deflection circuits and pro | Other | PA08 |
3
|
Download Model |
|
PA50A
Apex Microtechnology
|
1 | The PA50 is a 40A, 100V power operational amplifier featuring 200kHz of power bandwidth and a 50V/µs slew rate. With this combination of high current output, bandwidth, slew rate, and 400 watts of internal power dissipation, the PA50 is targeted for applications in the semi-cap equipment market. Another exceptional feature of the PA50 is its boost voltage inputs that allow the small signal portion of the amplifier to operate at a higher voltage than the high current output stage. The amplifier is then bias | Other | PA50A |
3
|
Download Model |
|
PB58
Apex Microtechnology
|
1 | 300V, 2A, Voltage and Current Gain Power Booster Amplifier, Wide supply range – ±15V to ±150V, High power bandwidth – 320kHz minimum, Low quiescent current – 12mA typical. | Other | PB58 |
3
|
Download Model |