A 4-layer PCB with a solid ground plane and thermal vias is recommended. The device should be placed near a thermal pad or heat sink to dissipate heat efficiently.
Use a pi-filter or LC filter with a cutoff frequency above 100 kHz to minimize EMI and ensure compliance with regulatory standards. The output filter should be designed to match the output impedance of the device.
A 10-22 μF X7R or X5R ceramic capacitor is recommended for input decoupling. The capacitor should be placed as close to the device as possible to minimize parasitic inductance.
Use a soft-start circuit to limit the inrush current during start-up. A voltage supervisor or reset IC can be used to ensure reliable start-up and shutdown. The enable pin should be driven by a logic signal with a valid voltage range.
The maximum allowed voltage on the enable pin is 5.5V. Exceeding this voltage may damage the device. A voltage divider or level shifter may be required if the enable signal is derived from a higher voltage source.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PAC5225QM Overview
Use the download button to access the PAC5225QM schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PAC52,
or try a keyword search, such as Power Management Circuits
About Qorvo
Qorvo is a prominent American semiconductor company that specializes in the design and manufacturing of radio frequency (RF) solutions. The company was formed in 2015 through the merger of TriQuint Semiconductor and RF Micro Devices. Qorvo's product portfolio encompasses a wide range of RF components and semiconductor technologies used in various applications, including wireless communications, aerospace and defense, and IoT (Internet of Things) devices.
