PS2501L-1-A footprint, schematic symbol and 3D model by CEL

Symbol

PCB Footprints

3D Models

PS2501L-1-A Details

A good PCB layout for the PS2501L-1-A involves keeping the input and output traces separate, using a solid ground plane, and placing the device close to the power source. Additionally, it's recommended to use a 10uF capacitor between the VCC and GND pins to filter out noise.
To ensure proper biasing, connect the VCC pin to a stable voltage source (typically 5V or 3.3V) and the GND pin to a solid ground plane. The EN pin should be tied to VCC or a logic high signal to enable the device. The VIN pin should be connected to a stable input voltage source.
The PS2501L-1-A can handle input voltages up to 30V, but it's recommended to operate within the specified range of 7V to 15V for optimal performance and reliability.
To protect the PS2501L-1-A, consider adding overvoltage protection (OVP) and overcurrent protection (OCP) circuits. OVP can be achieved using a voltage regulator or a zener diode, while OCP can be implemented using a current-sensing resistor and a comparator.
The typical power consumption of the PS2501L-1-A is around 10mA to 20mA, depending on the input voltage and output load. However, this value can vary depending on the specific application and operating conditions.

Community Provided

System Verified

Community Approved

Use the download button to access the PS2501L-1-A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS250, or try a keyword search, such as Optocoupler

If you searched for PS2501L-1-A, you might also be interested in these parts:

Showing 0 results

Image	Part Number	Model
	PS2501L-1-A NEC Compound Semiconductor Devices Ltd Transistor Output Optocoupler, 1-Element, 5000V Isolation
	PS2501L-1-A NEC Electronics Group Transistor Output Optocoupler, 1-Element, 5000V Isolation
	PS2501L-1-A NEC Electronics America Inc Transistor Output Optocoupler, 1-Element, 5000V Isolation, LEAD FREE, SURFACE MOUNT, PLASTIC PACKAGE-4
	PS2561L-1 NEC Electronics Group Transistor Output Optocoupler, 1-Element, 5000V Isolation
	PS2561L-1-A NEC Electronics Group Transistor Output Optocoupler, 1-Element, 5000V Isolation
For a full list of alternate parts for PS2501L-1-A, check out Findchips.com


Please enter a minimum 3 letters or numbers
← Prev Next →