PS2806-1-F3-A footprint, schematic symbol and 3D model by Renesas Electronics

Symbol

PCB Footprints

3D Models

PS2806-1-F3-A Details

A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the input and output traces short and away from noise sources. Use a common mode choke or ferrite bead to filter out high-frequency noise.
Use a 10uF ceramic capacitor and a 1uF ceramic capacitor in parallel, placed as close as possible to the VIN pin. Add a 10nF ceramic capacitor between the VIN and GND pins for additional filtering.
The maximum ambient temperature for reliable operation is 85°C. However, it's recommended to derate the device by 1.5°C/W above 70°C to ensure long-term reliability.
Yes, but ensure the device is properly secured to the PCB using a suitable adhesive or mechanical fastening method. Apply a conformal coating to protect the device from moisture and contaminants.
Use an oscilloscope to monitor the input and output voltages, and check for signs of oscillation or instability. Verify the input voltage is within the recommended range, and ensure proper decoupling and filtering.

Community Provided

System Verified

Community Approved

Use the download button to access the PS2806-1-F3-A schematic symbol, PCB footprint, and 3D model.

To find more CAD model downloads similar to this part, try a partial part number search, like PS280, or try a keyword search, such as Optocoupler

Showing 0 results


Please enter a minimum 3 letters or numbers
← Prev Next →