Description:The PS9587, PS9587L1, PS9587L2 and PS9587L3 are optically coupled isolators containing a GaAlAs LED on the input side and a photo diode and a signal processing circuit on the output side on one chip. The PS9587L1 and PS9587L2 are designed specifically for long creepage-distance as well as high common mode transient immunity (CMR) and High-Speed digital output type. Consequently, they are suitable for High-Speed logic interface that needs long creepage-distance (8 mm) on mounting. The PS9587L1 is lead bendin
Renesas provides a recommended PCB layout guide in their application note (APNK001) which includes guidelines for component placement, routing, and thermal management to ensure optimal performance and minimize noise.
The PS9587L2-V-E3-AX has a built-in overcurrent protection feature. To implement it, connect the OCP pin to a resistor and capacitor network, and set the threshold voltage according to the datasheet. Additionally, ensure that the sense resistor is properly sized to detect overcurrent conditions.
While the datasheet specifies an operating junction temperature range of -40°C to 125°C, Renesas recommends keeping the junction temperature below 100°C for reliable long-term operation. Exceeding this temperature may reduce the device's lifespan.
Yes, the PS9587L2-V-E3-AX is designed to withstand vibrations up to 10G (10 Hz to 2 kHz) according to the IEC 60068-2-6 standard. However, it's essential to ensure proper PCB mounting and component soldering to prevent mechanical stress and damage.
To troubleshoot output voltage regulation issues, check the input voltage, output voltage, and feedback resistors. Ensure that the feedback resistors are properly connected and that the output voltage is within the specified range. Also, verify that the device is not in a fault condition, such as overcurrent or overtemperature protection.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
PS9587L2-V-E3-AX Overview
Use the download button to access the PS9587L2-V-E3-AX schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like PS958,
or try a keyword search, such as Optocoupler
