Mitsubishi Electric recommends a 2-layer PCB with a thermal relief pattern on the bottom layer to improve heat dissipation. A minimum of 1 oz copper thickness is recommended for optimal thermal performance.
To ensure reliable operation in high-temperature environments, it is recommended to derate the power supply by 1% for every 1°C above 40°C. Additionally, ensure good airflow around the device and avoid blocking the heat sink fins.
Mitsubishi Electric recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for 50V or higher, as the input capacitor.
To protect the power supply from input voltage surges and spikes, Mitsubishi Electric recommends using a TVS (Transient Voltage Suppressor) diode or a varistor in parallel with the input capacitor.
Mitsubishi Electric recommends using a low-ESR ceramic capacitor with a value of 10uF to 22uF, rated for the output voltage, as the output capacitor.
Trust Checks
No trust score is available for this model.
Trust Score Unavailable
Sponsored
PSS50SA2F6 Overview
Use the download button to access the PSS50SA2F6 3D model. You can still request or build the schematic symbol and PCB footprint by using the respective build or request forms on this page.
To find more CAD model downloads similar to this part, try a partial part number search, like PSS50,
or try a keyword search, such as Motion Control Electronics
