Please enter a minimum 3 letters or numbers
Technical Content
Part Image

RF430F5978IRGCR - Texas Instruments

Description: RF430F59xx MSP430 SoC With Radio-Frequency Core and Low-Frequency Interface

Download RF430F5978IRGCR Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
Send part feedback
Symbol
RF430F5978IRGCR - Texas Instruments - PCB symbol
click to zoom
PCB Footprints
RF430F5978IRGCR - Texas Instruments PCB footprint - Quad Flat No-Lead - Quad Flat No-Lead - RGC -S-PVQFN-N64
click to zoom
3D Models
RF430F5978IRGCR - Texas Instruments - 3D model - Quad Flat No-Lead - RGC -S-PVQFN-N64
click to zoom

RF430F5978IRGCR Details

  • Manufacturer Part Number:

    RF430F5978IRGCR

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    QFN

  • Pin Count:

    64

  • Country Of Origin:

    Malaysia

  • ECCN Code:

    3A991.A.2

  • HTS Code:

    8542.31.00.75

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Additional Feature:

    Frequency range : 134.2 kHz,Sub-1-GHz

  • Bit Size:

    32

  • Bus Compatibility:

    I2C; SPI; UART

  • CPU Family:

    MSP430

  • JESD-30 Code:

    S-PQCC-N64

  • JESD-609 Code:

    e4

  • Length:

    9 mm

  • Moisture Sensitivity Level:

    3

  • Number of Terminals:

    64

  • Operating Temperature-Max:

    85 °C

  • Operating Temperature-Min:

    -40 °C

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    HVQCCN

  • Package Equivalence Code:

    LCC64,.35SQ,20

  • Package Shape:

    SQUARE

  • Package Style:

    CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • RAM (bytes):

    4096

  • ROM (words):

    32768

  • ROM Programmability:

    FLASH

  • Seated Height-Max:

    1 mm

  • Speed:

    20 MHz

  • Supply Current-Max:

    5.1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    2 V

  • Supply Voltage-Nom:

    3 V

  • Surface Mount:

    YES

  • Technology:

    CMOS

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    NO LEAD

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    QUAD

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Width:

    9 mm

  • uPs/uCs/Peripheral ICs Type:

    RFSoC

RF430F5978IRGCR Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate layer for the RF signal is recommended. The RF signal should be routed on the top layer, and the ground plane should be on the bottom layer. Additionally, the device should be placed near the edge of the PCB to minimize interference.
  • The antenna design should be optimized for the specific frequency band of operation. A quarter-wavelength monopole antenna or a dipole antenna is recommended. The antenna should be matched to the device's output impedance (typically 50 ohms) to ensure maximum power transfer.
  • The maximum transmit power of the RF430F5978IRGCR is +20 dBm (100 mW). However, the actual transmit power may be limited by regulatory requirements and the specific application.
  • The RF430F5978IRGCR supports FHSS through its built-in frequency synthesizer. The device can be programmed to hop between multiple frequencies using the device's registers. The hopping sequence and frequency range should be programmed according to the specific application and regulatory requirements.
  • The recommended crystal oscillator frequency for the RF430F5978IRGCR is 26 MHz or 32.768 kHz. The crystal oscillator frequency should be chosen based on the specific application and frequency band of operation.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

RF430F5978IRGCR Overview

Use the download button to access the RF430F5978IRGCR schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RF430, or try a keyword search, such as Other uPs/uCs/Peripheral ICs

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to RF430F5978IRGCR

Showing 0 results

Part Image

← Prev Next →
About Us Contact Us Terms of Service Do not sell or share my personal information Privacy Policy Digital Services Act Library Loader Twitter LinkedIn

All content Copyright © 2020, Supplyframe.com. All rights reserved. Back to top ↑