Toshiba recommends a 4-layer PCB with a solid ground plane and a separate power plane for the VCC and VEE pins. The input and output tracks should be kept short and away from noise sources. A recommended layout is available in the Toshiba application note.
The RN4903 requires a specific biasing scheme to achieve optimal linearity. The recommended biasing scheme is to set VCC to 5V, VEE to -5V, and the input common-mode voltage to 0V. The output common-mode voltage should be set to 0V or VCC/2 for single-ended or differential output, respectively.
The RN4903 is rated for operation from -40°C to +85°C. However, the device's performance may degrade at higher temperatures, and the user should ensure that the device is properly heat-sinked and operated within the recommended temperature range.
The RN4903 has built-in ESD protection, but it is still recommended to take precautions during handling and assembly. Use an anti-static wrist strap, mat, or workstation, and avoid touching the device's pins. If ESD protection is required, use a TVS diode or other ESD protection device in accordance with the Toshiba application note.
The recommended input impedance for the RN4903 is 50 ohms. This ensures optimal signal integrity and minimizes reflections. The input impedance can be achieved using a resistive termination or a transmission line with a characteristic impedance of 50 ohms.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
RN4903,LF(CT Overview
Use the download button to access the RN4903,LF(CT schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like RN490,
or try a keyword search, such as Small Signal Bipolar Transistors
