The recommended PCB layout for the SI2310A-TP involves keeping the input and output traces as short as possible, using a solid ground plane, and placing a 10nF capacitor between the VIN and GND pins to filter out noise.
To ensure proper thermal management, the SI2310A-TP should be mounted on a PCB with a thermal pad connected to a solid ground plane, and the device should be placed in a well-ventilated area to prevent overheating.
The maximum allowed voltage on the EN pin is 6V, exceeding which may cause damage to the device.
The SI2310A-TP is rated for operation up to 125°C, but it's recommended to derate the output current and voltage to ensure reliable operation in high-temperature environments.
To troubleshoot issues with the SI2310A-TP, check the input voltage, output voltage, and enable pin voltage using an oscilloscope or multimeter, and verify that the device is properly soldered and mounted on the PCB.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SI2310A-TP Overview
Use the download button to access the SI2310A-TP schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SI231,
or try a keyword search, such as Power Field-Effect Transistors