SiTime recommends a 4-layer PCB with a dedicated ground plane, and to keep the oscillator away from high-frequency signals and noise sources. A good layout practice is to use a symmetrical layout, with the oscillator centered on the PCB, and to minimize the distance between the oscillator and the crystal.
The SIT8924BM-13-XXE-50.000000 has an internal 15kΩ pull-up resistor on the output, so no external termination is required. However, if you need to drive a load, ensure the load impedance is matched to the output impedance of the oscillator, which is typically 50Ω.
The SIT8924BM-13-XXE-50.000000 is rated for operation from -40°C to +85°C, but it can be customized for extended temperature ranges. Contact SiTime for custom temperature range options.
The SIT8924BM-13-XXE-50.000000 has built-in ESD protection, but it's still recommended to follow proper ESD handling procedures during assembly and testing. Use an ESD wrist strap or mat, and avoid touching the device pins or exposed internal components.
The SIT8924BM-13-XXE-50.000000 is designed to operate in environments with moderate vibration. However, if your application requires operation in high-vibration environments, consider using a vibration-resistant oscillator or consulting with SiTime for custom solutions.
Trust Checks
This model has been built in collaboration with the manufacturer.
Manufacturer Collaborated
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored
SIT8924BM-13-XXE-50.000000 Overview
Use the download button to access the SIT8924BM-13-XXE-50.000000 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SIT89,
or try a keyword search, such as XO
