Part Image

SN65176BDRG4 - Texas Instruments

Description: Differential Bus Transceiver

Download SN65176BDRG4 Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN65176BDRG4 - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - D0008A  SOIC
click to zoom
3D Models
SN65176BDRG4 - Texas Instruments  - 3D model - Small Outline Packages - D0008A  SOIC
click to zoom

SN65176BDRG4 Details

  • Manufacturer Part Number:

    SN65176BDRG4

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • Part Package Code:

    SOIC

  • Pin Count:

    8

  • Country Of Origin:

    Malaysia, Mexico

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.00002 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-422-B; TIA-422-B; EIA-485-A; TIA-485-A; V.11; X.27

  • JESD-30 Code:

    R-PDSO-G8

  • JESD-609 Code:

    e4

  • Length:

    4.905 mm

  • Moisture Sensitivity Level:

    1

  • Number of Functions:

    1

  • Number of Terminals:

    8

  • Operating Temperature-Max:

    105 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.008 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    SOP

  • Package Equivalence Code:

    SOP8,.24

  • Package Shape:

    RECTANGULAR

  • Package Style:

    SMALL OUTLINE

  • Peak Reflow Temperature (Cel):

    260

  • Qualification Status:

    Not Qualified

  • Receive Delay-Max:

    35 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.75 mm

  • Supply Current-Max:

    70 mA

  • Supply Voltage-Max:

    5.25 V

  • Supply Voltage-Min:

    4.75 V

  • Supply Voltage-Nom:

    5 V

  • Supply Voltage1-Max:

    5.25 V

  • Supply Voltage1-Min:

    4.75 V

  • Supply Voltage1-Nom:

    5 V

  • Surface Mount:

    YES

  • Temperature Grade:

    INDUSTRIAL

  • Terminal Finish:

    Nickel/Palladium/Gold (Ni/Pd/Au)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    1.27 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    22 ns

  • Width:

    3.895 mm

SN65176BDRG4 Frequently Asked Questions (FAQs)

  • A 4-layer PCB with a solid ground plane and a separate power plane is recommended. Keep the signal traces short and away from the power planes. Use a common mode choke or a ferrite bead to filter the power supply.
  • Use a thermal pad or a heat sink to dissipate heat. Ensure good airflow around the device. Avoid overheating by keeping the junction temperature below 150°C. Use a thermistor or a temperature sensor to monitor the temperature.
  • The critical timing parameters are the input rise and fall times, propagation delay, and output enable time. Ensure that the input signals meet the specified rise and fall times (typically 10 ns) and that the propagation delay is within the specified range (typically 10-20 ns).
  • Use a shielded enclosure, keep the signal traces short, and use a common mode choke or a ferrite bead to filter the power supply. Ensure good grounding and use a ground plane to reduce EMI. Use EMI-absorbing materials or shielding cans if necessary.
  • The power supplies should be sequenced in the following order: VCC, then VDD, and finally the input signals. Ensure that the power supplies are stable and within the specified voltage range before applying input signals.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN65176BDRG4 Overview

Use the download button to access the SN65176BDRG4 schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN651, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN65176BDRG4

Showing 0 results

SN65176BDRG4 Alternates

Showing results

Image Part Number Model
Part Image MAX485EESA+T Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, CMOS, PDSO8

Part Image SP1486EEN-L/TR MaxLinear Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, PDSO8

Part Image LMS1485IMX Texas Instruments

Line Transceiver

Part Image LMS1485IM/NOPB Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

Part Image ADM1485JR-REEL7 Analog Devices Inc

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO8

For a full list of alternate parts for SN65176BDRG4, check out Findchips.com