Part Image

SN65HVD70DGS - Texas Instruments

Description: 3.3V, Full-Duplex RS-485, 12kV IEC ESD, 400kbps data rate, w/Enables

Download SN65HVD70DGS Model
Schematic
symbols
Schematic symbol is unavailable for download
PCB
footprints
PCB footprint is unavailable for download
3D
models
3D model is unavailable for download
PCB Footprints
SN65HVD70DGS - Texas Instruments PCB footprint - Small Outline Packages - Small Outline Packages - DGS0010A height 1.1
click to zoom
3D Models
SN65HVD70DGS - Texas Instruments  - 3D model - Small Outline Packages - DGS0010A height 1.1
click to zoom

SN65HVD70DGS Details

  • Manufacturer Part Number:

    SN65HVD70DGS

  • Brand Name:

    Texas Instruments

  • Pbfree Code:

    Yes

  • Rohs Code:

    Yes

  • Part Life Cycle Code:

    Active

  • ECCN Code:

    EAR99

  • HTS Code:

    8542.39.00.90

  • Manufacturer:

    Texas Instruments

  • YTEOL:

    15

  • Differential Output:

    YES

  • Driver Number of Bits:

    1

  • High Level Input Current-Max:

    0.000003 A

  • Input Characteristics:

    DIFFERENTIAL SCHMITT TRIGGER

  • Interface IC Type:

    LINE TRANSCEIVER

  • Interface Standard:

    EIA-485

  • JESD-30 Code:

    S-PDSO-G10

  • JESD-609 Code:

    e4

  • Length:

    3 mm

  • Moisture Sensitivity Level:

    2

  • Number of Functions:

    1

  • Number of Terminals:

    10

  • Operating Temperature-Max:

    125 °C

  • Operating Temperature-Min:

    -40 °C

  • Out Swing-Min:

    1.5 V

  • Output Characteristics:

    3-STATE

  • Output Low Current-Max:

    0.008 A

  • Output Polarity:

    COMPLEMENTARY

  • Package Body Material:

    PLASTIC/EPOXY

  • Package Code:

    TSSOP

  • Package Shape:

    SQUARE

  • Package Style:

    SMALL OUTLINE, THIN PROFILE, SHRINK PITCH

  • Peak Reflow Temperature (Cel):

    260

  • Receive Delay-Max:

    110 ns

  • Receiver Number of Bits:

    1

  • Seated Height-Max:

    1.1 mm

  • Supply Current-Max:

    1.1 mA

  • Supply Voltage-Max:

    3.6 V

  • Supply Voltage-Min:

    3 V

  • Supply Voltage-Nom:

    3.3 V

  • Supply Voltage1-Max:

    3.6 V

  • Supply Voltage1-Min:

    3 V

  • Supply Voltage1-Nom:

    3.3 V

  • Surface Mount:

    YES

  • Technology:

    BICMOS

  • Temperature Grade:

    AUTOMOTIVE

  • Terminal Finish:

    Nickel/Palladium/Gold/Silver (Ni/Pd/Au/Ag)

  • Terminal Form:

    GULL WING

  • Terminal Pitch:

    0.5 mm

  • Terminal Position:

    DUAL

  • Time@Peak Reflow Temperature-Max (s):

    30

  • Transmit Delay-Max:

    550 ns

  • Width:

    3 mm

SN65HVD70DGS Frequently Asked Questions (FAQs)

  • The maximum cable length supported by the SN65HVD70DGS depends on the baud rate and the type of cable used. As a general guideline, Texas Instruments recommends a maximum cable length of 100 meters at 1 Mbps and 40 meters at 10 Mbps.
  • To ensure EMC with the SN65HVD70DGS, follow proper PCB layout and design guidelines, use a shielded cable, and consider adding common-mode chokes or ferrite beads to the transmission lines. Additionally, ensure that the device is properly grounded and that the system meets the relevant EMC standards.
  • The recommended termination scheme for the SN65HVD70DGS is a 120-ohm differential termination resistor at the receiving end of the bus. This helps to reduce reflections and improve signal integrity.
  • Yes, the SN65HVD70DGS can be used in a multi-point configuration, but it requires careful consideration of the bus topology and termination. A multi-point configuration can be achieved by connecting multiple devices to a common bus, but each device must have its own termination resistor.
  • To handle hot-swapping with the SN65HVD70DGS, ensure that the device is powered down before disconnecting or connecting it to the bus. Additionally, consider using a hot-swap controller or a power-switching device to control the power supply to the device during hot-swapping.

Trust Checks

This model has been provided by community users.
Community Provided
This model has been verified by system checks.
System Verified
This model has been reviewed by community users.
Community Approved
Sponsored

SN65HVD70DGS Overview

Use the download button to access the SN65HVD70DGS schematic symbol, PCB footprint, and 3D model.
To find more CAD model downloads similar to this part, try a partial part number search, like SN65H, or try a keyword search, such as Line Driver or Receivers

About Texas Instruments

Texas Instruments (TI) designs and manufactures semiconductors and integrated circuits for a wide range of applications. The company's product portfolio includes analog chips, which are essential for managing power and signal functions in electronic devices, and embedded processors, which serve as the brains in various systems, enabling functionality in everything from industrial equipment to consumer electronics. TI's innovations in semiconductor technology have made it a leader in the industry.

Parts related to SN65HVD70DGS

Showing 0 results

SN65HVD70DGS Alternates

Showing results

Image Part Number Model
Part Image SN65HVD1470DGSR Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10

Part Image SN65HVD1470DGS Texas Instruments

Line Transceiver, 1 Func, 1 Driver, 1 Rcvr, BICMOS, PDSO10